All MIBs › PROBE-MIB › currentUtilizationPeriod
currentUtilizationPeriod
Module: PROBE-MIB
OID (symbolic): PROBE-MIB::currentUtilizationPeriod
OID (numeric): 1.3.6.1.4.1.11.2.3.7.6.1.5.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The number of seconds over which the currentUtilization object is calculated. Any change to this variable causes the value of currentUtilization to be set to all 1's. On a multi-interface probe, this parameter applies only to interface index 1. Refer to currentUtilizationTable in this document for the current utilization parameters for the other interfaces on a multi- interface probe.
What is currentUtilizationPeriod?
Sets the averaging window, in seconds, over which currentUtilization is calculated (default 5); changing this resets the current reading until a full new period has elapsed. On a multi-interface probe this only applies to interface 1 - use the per-interface currentUtilizationTable for the others.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.5.1.1 snmpwalk -v2c -c public <target> PROBE-MIB::currentUtilizationPeriod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.5.1.1.1 snmpget -v2c -c public <target> PROBE-MIB::currentUtilizationPeriod.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.6.1.5.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> currentUtilizationPeriod.1
Start monitoring dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROBE-MIB::currentUtilizationPeriod OID value, configure state conditions and alerts, and monitor any dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.6 | lanprobe | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1 | general | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5 | rmonExtension | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1 | statsExtension | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.1 | currentUtilizationPeriod | PROBE-MIB |