All MIBs › PROBE-MIB › curUtilTransmit
curUtilTransmit
Module: PROBE-MIB
OID (symbolic): PROBE-MIB::curUtilTransmit
OID (numeric): 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The best estimate of the mean physical layer network utilization on the monitor's physical interface during the previous number of seconds defined by curUtilPeriod for this entry in the table. The units of this object are hundredths of a percent. Its value will normally be in the range (0..10000). A value of all 1's means that a full curUtilPeriod for this entry in the table has not passed since either monitor startup or the last time curUtilPeriod was changed.
For a LAN interface with the exception of the Fast Ethernet LanProbe option 201, this value should be zero. For the Fast Ethernet LanProbe option 201, a WanProbe or ATMProbe, this value should reflect the network traffic on the receive wires/cable.
What is curUtilTransmit?
Intended to report the mean transmit-direction network utilization on this interface. Note: the source MIB's DESCRIPTION for this object is copy-pasted verbatim from curUtilReceive and literally still says "receive wires/cable," which is a documentation bug in the MIB; based on the object name and table position, the real meaning is the transmit-side counterpart to curUtilReceive.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.5 snmpwalk -v2c -c public <target> PROBE-MIB::curUtilTransmit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.5.1 snmpget -v2c -c public <target> PROBE-MIB::curUtilTransmit.1
Start monitoring dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROBE-MIB::curUtilTransmit OID value, configure state conditions and alerts, and monitor any dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.6 | lanprobe | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1 | general | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5 | rmonExtension | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1 | statsExtension | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7 | currentUtilizationTable | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1 | currentUtilizationEntry | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.5 | curUtilTransmit | PROBE-MIB |