All MIBs › PROBE-MIB › curUtilReceive
curUtilReceive
Module: PROBE-MIB
OID (symbolic): PROBE-MIB::curUtilReceive
OID (numeric): 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The best estimate of the mean physical layer network utilization on the monitor's physical interface during the previous number of seconds defined by curUtilPeriod for this entry in the table. The units of this object are hundredths of a percent. Its value will normally be in the range (0..10000). A value of all 1's means that a full curUtilPeriod for this entry in the table has not passed since either monitor startup or the last time curUtilPeriod was changed.
For a LAN interface with the exception of the Fast Ethernet LanProbe option 201, this value should be zero. For the Fast Ethernet LanProbe option 201, a WanProbe or ATMProbe, this value should reflect the network traffic on the receive wires/cable.
What is curUtilReceive?
Reports the mean receive-direction network utilization on this interface, in hundredths of a percent; this is zero on most LAN interfaces and only meaningful on the Fast Ethernet option, WanProbes, or ATMProbes that can measure the two directions separately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.4 snmpwalk -v2c -c public <target> PROBE-MIB::curUtilReceive
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.4.1 snmpget -v2c -c public <target> PROBE-MIB::curUtilReceive.1
Start monitoring dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROBE-MIB::curUtilReceive OID value, configure state conditions and alerts, and monitor any dedicated RMON/network probe appliances, vendor-implemented, may vary by manufacturer from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.6 | lanprobe | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1 | general | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5 | rmonExtension | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1 | statsExtension | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7 | currentUtilizationTable | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1 | currentUtilizationEntry | PROBE-MIB |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.4 | curUtilReceive | PROBE-MIB |