All MIBs › POWER-ETHERNET-OLD-MIB › aPethPsePortDetectionStatus
aPethPsePortDetectionStatus
Module: POWER-ETHERNET-OLD-MIB
OID (symbolic): POWER-ETHERNET-OLD-MIB::aPethPsePortDetectionStatus
OID (numeric): 1.3.6.1.2.1.10.7.20.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state IDLE A value of searching(2)- indicates that the PSE State diagram is in the state DETECTION, CLASSIFICATION, SIGNATURE_INVALID or BACKOFF. A value of deliveringPower(4) - indicates that the PSE State diagram is in the state POWER_UP, POWER_ON or POWER_OFF. A value of fault(5) - indicates that the PSE State diagram is in the state TEST_ERROR or the state IDLE due to the variable error condition. Faults detected are vendor specific. A value of test(7) - indicates that the PSE State diagram is in the state TEST_MODE. A value of denyLowPriority(8) indicates that the port was disabled by the power management system, in order to keep active higher priority ports.
What is aPethPsePortDetectionStatus?
A read-only enumeration of the port's PD-detection state machine: disabled, searching, deliveringPower, fault, test, or denyLowPriority (disabled by the power budget manager to protect higher-priority ports). Admins poll this as the primary field to see whether a PoE port is actually powering its connected device or stuck in a fault/searching state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.7 snmpwalk -v2c -c public <target> POWER-ETHERNET-OLD-MIB::aPethPsePortDetectionStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.7.20.1.1.1.7.1 snmpget -v2c -c public <target> POWER-ETHERNET-OLD-MIB::aPethPsePortDetectionStatus.1
Start monitoring Early IEEE 802.3af PoE-capable Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the POWER-ETHERNET-OLD-MIB::aPethPsePortDetectionStatus OID value, configure state conditions and alerts, and monitor any Early IEEE 802.3af PoE-capable Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.7 | dot3 | EtherLike-MIB |
| 1.3.6.1.2.1.10.7.20 | powerEthernetMIB | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1 | pethObjects | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1 | pethPsePortTable | PETH-MIB |
| 1.3.6.1.2.1.10.7.20.1.1.1 | pethPsePortEntry | PETH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.7.20.1.1.1.7 | aPethPsePortDetectionStatus | POWER-ETHERNET-OLD-MIB |