All MIBs › PLAINTREE-SWITCH-MIB › switchBpeEnabled
switchBpeEnabled
Module: PLAINTREE-SWITCH-MIB
OID (symbolic): PLAINTREE-SWITCH-MIB::switchBpeEnabled
OID (numeric): 1.3.6.1.4.1.295.3.2.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this variable to TRUE (1) causes the bridge protocol engine to perform the Spanning Tree Protocol as defined in IEEE802.1d. Setting this variable to FALSE (0) causes the BPE to stop performing the Spanning Tree Protocol. The value of this variable when the switch starts operating is 1.
What is switchBpeEnabled?
Turns the bridge protocol engine's Spanning Tree Protocol (IEEE 802.1d) on (1) or off (0); it defaults to enabled at startup, and an admin would disable it only in a topology with no redundant links where STP overhead isn't needed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.295.3.2.1.1.1.7 snmpwalk -v2c -c public <target> PLAINTREE-SWITCH-MIB::switchBpeEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.295.3.2.1.1.1.7.1 snmpget -v2c -c public <target> PLAINTREE-SWITCH-MIB::switchBpeEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.295.3.2.1.1.1.7.1 i <value>
Start monitoring Plaintree Systems Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PLAINTREE-SWITCH-MIB::switchBpeEnabled OID value, configure state conditions and alerts, and monitor any Plaintree Systems Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.295 | vendor | PLAINTREE-SWITCH-MIB |
| 1.3.6.1.4.1.295.3 | switch | PLAINTREE-SWITCH-MIB |
| 1.3.6.1.4.1.295.3.2 | switchSoftware | PLAINTREE-SWITCH-MIB |
| 1.3.6.1.4.1.295.3.2.1 | switchInfo | PLAINTREE-SWITCH-MIB |
| 1.3.6.1.4.1.295.3.2.1.1 | switchBasicTable | PLAINTREE-SWITCH-MIB |
| 1.3.6.1.4.1.295.3.2.1.1.1 | switchBasicEntry | PLAINTREE-SWITCH-MIB |
| 1.3.6.1.4.1.295.3.2.1.1.1.7 | switchBpeEnabled | PLAINTREE-SWITCH-MIB |