All MIBs › PIM-STD-MIB › pimRegisterSuppressionTime
pimRegisterSuppressionTime
Module: PIM-STD-MIB
OID (symbolic): PIM-STD-MIB::pimRegisterSuppressionTime
OID (numeric): 1.3.6.1.2.1.157.1.15
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The duration of the Register Suppression Timer. This is the period during which a PIM Designated Router (DR) stops sending Register-encapsulated data to the Rendezvous Point (RP) after receiving a Register-Stop message. This object is used to run timers both at the DR and at the RP. This timer period is called the Register_Suppression_Time in the PIM-SM specification.
The storage type of this object is determined by pimDeviceConfigStorageType.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.157.1.15 snmpwalk -v2c -c public <target> PIM-STD-MIB::pimRegisterSuppressionTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.157.1.15.1 snmpget -v2c -c public <target> PIM-STD-MIB::pimRegisterSuppressionTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.157.1.15.1 i <value>
Start monitoring vendor-neutral, standards-based MIB (PIM-SM/BIDIR-PIM/PIM-DM, RFC 5060) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PIM-STD-MIB::pimRegisterSuppressionTime OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (PIM-SM/BIDIR-PIM/PIM-DM, RFC 5060) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.157 | pimStdMIB | PIM-STD-MIB |
| 1.3.6.1.2.1.157.1 | pim | PIM-STD-MIB |
| 1.3.6.1.2.1.157.1.15 | pimRegisterSuppressionTime | PIM-STD-MIB |