All MIBs › PIM-STD-MIB › pimInterfaceTrigHelloInterval
pimInterfaceTrigHelloInterval
Module: PIM-STD-MIB
OID (symbolic): PIM-STD-MIB::pimInterfaceTrigHelloInterval
OID (numeric): 1.3.6.1.2.1.157.1.1.1.10
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description:
The maximum time before this router sends a triggered PIM Hello message on this interface. This object corresponds to the 'Trigered_Hello_Delay' timer value defined in the PIM-SM specification. A value of zero has no special meaning and indicates that triggered PIM Hello messages should always be sent immediately.
What is pimInterfaceTrigHelloInterval?
This stores a time interval in milliseconds that defines the maximum delay before sending a triggered PIM Hello message on the interface. It controls how quickly the router alerts neighbors to topology changes in the multicast network. An operator would adjust this value to tune multicast convergence speed—lower values detect failures faster but increase control traffic.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.157 | pimStdMIB | PIM-STD-MIB |
| 1.3.6.1.2.1.157.1 | pim | PIM-STD-MIB |
| 1.3.6.1.2.1.157.1.1 | pimInterfaceTable | PIM-STD-MIB |
| 1.3.6.1.2.1.157.1.1.1 | pimInterfaceEntry | PIM-STD-MIB |
| 1.3.6.1.2.1.157.1.1.1.10 | pimInterfaceTrigHelloInterval | PIM-STD-MIB |