All MIBs › PEA-IF-IPDSLAM › adslIfTestType
adslIfTestType
Module: PEA-IF-IPDSLAM
OID (symbolic): PEA-IF-IPDSLAM::adslIfTestType
OID (numeric): 1.3.6.1.4.1.193.72.300.50.1.4.1.3
Node type: OBJECT-TYPE
Type: AutonomousType
Access: read-write
Description: A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated.
When read, this object always returns the most recent value that adslIfTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
What is adslIfTestType?
This read-write AutonomousType is a control object used to start or stop operator-initiated interface tests by writing an OBJECT IDENTIFIER for the desired test, with noTest ({0 0}) aborting any running test. An admin sets this to the OID of a specific test (such as the full-duplex loopback test defined in this MIB) to trigger diagnostics on the DSL line. For example, writing the loopback test OID here starts a loopback test on that port, and writing noTest aborts it if already in progress.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.50.1.4.1.3 snmpwalk -v2c -c public <target> PEA-IF-IPDSLAM::adslIfTestType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.50.1.4.1.3.1 snmpget -v2c -c public <target> PEA-IF-IPDSLAM::adslIfTestType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.50.1.4.1.3.1 s <value>
Start monitoring Ericsson Diax IP DSLAM, DSL access multiplexer (subscriber ADSL interface ports) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-IF-IPDSLAM::adslIfTestType OID value, configure state conditions and alerts, and monitor any Ericsson Diax IP DSLAM, DSL access multiplexer (subscriber ADSL interface ports) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.50 | peaIfIpDslam | PEA-IF-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.50.1 | adslIfObjects | PEA-IF-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.50.1.4 | adslIfTestTable | PEA-IF-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.50.1.4.1 | adslIfTestEntry | PEA-IF-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.50.1.4.1.3 | adslIfTestType | PEA-IF-IPDSLAM |