All MIBs › PEA-IF-IPDSLAM › adslIfOperStatus
adslIfOperStatus
Module: PEA-IF-IPDSLAM
OID (symbolic): PEA-IF-IPDSLAM::adslIfOperStatus
OID (numeric): 1.3.6.1.4.1.193.72.300.50.1.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If adslIfAdminStatus is down(2) then adslIfOperStatus should be down(2). If adslIfAdminStatus is changed to up(1) then adslIfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(6) state if the interface has missing (typically, hardware) components.
What is adslIfOperStatus?
This read-only enumerated object reports the interface's actual current operational state (up/down/testing/unknown/dormant/notPresent/lowerLayerDown), which tracks but can lag adslIfAdminStatus. An admin watches this to see whether a DSL line is actually passing traffic versus just administratively enabled, and to spot hardware issues via notPresent or dependency issues via lowerLayerDown. For example, if adslIfAdminStatus is up(1) but adslIfOperStatus stays down(2), it indicates a fault such as no signal from the CPE preventing the line from syncing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.50.1.2.1.6 snmpwalk -v2c -c public <target> PEA-IF-IPDSLAM::adslIfOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.50.1.2.1.6.1 snmpget -v2c -c public <target> PEA-IF-IPDSLAM::adslIfOperStatus.1
Start monitoring Ericsson Diax IP DSLAM, DSL access multiplexer (subscriber ADSL interface ports) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-IF-IPDSLAM::adslIfOperStatus OID value, configure state conditions and alerts, and monitor any Ericsson Diax IP DSLAM, DSL access multiplexer (subscriber ADSL interface ports) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.50 | peaIfIpDslam | PEA-IF-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.50.1 | adslIfObjects | PEA-IF-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.50.1.2 | adslIfTable | PEA-IF-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.50.1.2.1 | adslIfEntry | PEA-IF-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.50.1.2.1.6 | adslIfOperStatus | PEA-IF-IPDSLAM |