All MIBs › PEA-EQUIPMENT › phyMode
phyMode
Module: PEA-EQUIPMENT
OID (symbolic): PEA-EQUIPMENT::phyMode
OID (numeric): 1.3.6.1.4.1.193.72.600.1.1.6.2
Node type: OBJECT-TYPE
Type: PhyModeType
Access: read-write
Description: Ethernet PHY Mode setting. The Phy Mode is coded as a bitfield: * Bit 0: Auto-negotiation. If set, auto-negotiation is OFF else ON. * Bit 2: Full Duplex control. If set, full duplex operation is NOT allowed. * Bit 3: 100 Mbit/s control. If set, 100 Mbit/s operation is NOT allowed. * Bit 4: Half Duplex control. If set, half duplex operation is NOT allowed * Bit 5: 10 Mbit/s control. If set, 10 Mbit/s operation is NOT allowed. Examples of PHY Mode values: * 0x00: Full auto-negotiation. * 0x20: 100 Mbit/s only. Auto-negotiation between half & full duplex. * 0x31: Fixed 100 Mbit/s, full duplex only operation. * 0x25: Fixed 100 Mbit/s, half duplex only operation
What is phyMode?
Configures the Ethernet PHY's speed, duplex, and autonegotiation behavior via a bitfield, e.g. 0x00 for full autonegotiation or 0x31 for fixed 100 Mbit/s full duplex; set it to force a specific link mode when autonegotiation with a peer device is unreliable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.600.1.1.6.2 snmpwalk -v2c -c public <target> PEA-EQUIPMENT::phyMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.600.1.1.6.2.1 snmpget -v2c -c public <target> PEA-EQUIPMENT::phyMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.600.1.1.6.2.1 s <value>
Start monitoring Ericsson IP DSLAM chassis (system identity/hardware health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT::phyMode OID value, configure state conditions and alerts, and monitor any Ericsson IP DSLAM chassis (system identity/hardware health) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.600 | pea | PEA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.600.1 | peaEquipment | PEA-EQUIPMENT |
| 1.3.6.1.4.1.193.72.600.1.1 | commonObjects | PEA-EQUIPMENT |
| 1.3.6.1.4.1.193.72.600.1.1.6 | configurationData | PEA-EQUIPMENT |
| 1.3.6.1.4.1.193.72.600.1.1.6.2 | phyMode | PEA-EQUIPMENT |