PEA-EQUIPMENT :: peaMultilinkMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PEA-EQUIPMENT › peaMultilinkMode

peaMultilinkMode

Module: PEA-EQUIPMENT

OID (symbolic): PEA-EQUIPMENT::peaMultilinkMode

OID (numeric): 1.3.6.1.4.1.193.72.600.1.1.20.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This defines the mode the multiple network-side links operate in.

singleLink(1) - only one link is used for active data transfer. This is the only possible value for devices with a single network-side link.

linkAggregation(2) - the multiple links are used as one trunk aggregating the traffic.

redundantConfiguration(3) - only one of the the multiple links is used for active data transfer, but the other are kept stand by for resilience (uses RSTP protocol).

Note: the read value may not match the actual mode during switch over.

What is peaMultilinkMode?

Selects how the device's multiple network-side uplinks operate together: singleLink(1) uses only one active link (the only option on single-uplink units), linkAggregation(2) bonds them into one trunk, or redundantConfiguration(3) keeps one active and the rest on RSTP-protected standby; the read value may briefly lag reality during an actual switchover.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.600.1.1.20.1
snmpwalk -v2c -c public <target> PEA-EQUIPMENT::peaMultilinkMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.600.1.1.20.1.1
snmpget -v2c -c public <target> PEA-EQUIPMENT::peaMultilinkMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.600.1.1.20.1.1 i <value>

Start monitoring Ericsson IP DSLAM chassis (system identity/hardware health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-EQUIPMENT::peaMultilinkMode OID value, configure state conditions and alerts, and monitor any Ericsson IP DSLAM chassis (system identity/hardware health) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.72diaxMIBDXD-SMI
1.3.6.1.4.1.193.72.600peaPEA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.72.600.1peaEquipmentPEA-EQUIPMENT
1.3.6.1.4.1.193.72.600.1.1commonObjectsPEA-EQUIPMENT
1.3.6.1.4.1.193.72.600.1.1.20peaMultilinkPEA-EQUIPMENT
1.3.6.1.4.1.193.72.600.1.1.20.1peaMultilinkModePEA-EQUIPMENT