All MIBs › PEA-BRIDGE-IPDSLAM › wredBufferLimit
wredBufferLimit
Module: PEA-BRIDGE-IPDSLAM
OID (symbolic): PEA-BRIDGE-IPDSLAM::wredBufferLimit
OID (numeric): 1.3.6.1.4.1.193.72.300.30.1.30.5.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description:
Weighted Random Early Discard (WRED) buffer limit specifies the queue usages limit for traffic with a specific VLAN priority. The drop limit is specified as a percentage of the total queue length (dfcMaxQueueBuffers) for the Flow. F.ex. if the flow queue can contain 100 packets and wredBufferLimit is set to 70%, then the IP-DSLAM WRED mechanism will start dropping packets with the specific VLAN priority when more than 70 buffers from the queue is in use.
Valid from: EDA 2.2 R3A
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.30.1.30.5.5 snmpwalk -v2c -c public <target> PEA-BRIDGE-IPDSLAM::wredBufferLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.30.1.30.5.5.1 snmpget -v2c -c public <target> PEA-BRIDGE-IPDSLAM::wredBufferLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.30.1.30.5.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| 1.3.6.1.4.1.193.72.300.30 | peaBridgeIpDslam | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1 | bridgeControl | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.30 | downstreamFlowWredConfigTable | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.30.5 | downstreamFlowWredConfigEntry | PEA-BRIDGE-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.30.1.30.5.5 | wredBufferLimit | PEA-BRIDGE-IPDSLAM |