All MIBs › PDN-SYSLOG-MIB › pdnSyslogSeverityThreshold
pdnSyslogSeverityThreshold
Module: PDN-SYSLOG-MIB
OID (symbolic): PDN-SYSLOG-MIB::pdnSyslogSeverityThreshold
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.31.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value corresponds to a minimum severity level that a syslog messages can be set. All syslog message with an enum value greater than the threshold will not be sent. The values are obtain from the RFC 3164 The BSD Syslog Protocol:
emerg (0) - Emergency: system is unusable alert (1) - Alert: action must be taken immediately critical (2) - Critical: critical conditions error (3) - Error: error conditions warning (4) - Warning: warning conditions notice (5) - Notice: normal but significant condition info (6) - Informational: informational messages debug (7) - Debug: debug-level messages
For a more complete description of the severity levels, please reference your Operation Specification Manual for details pertaining to that product.
What is pdnSyslogSeverityThreshold?
This read-write value sets the minimum severity level, using the RFC 3164 BSD Syslog Protocol scale from emerg(0) through debug(7), below which syslog messages will not be sent; only messages with a severity value less than or equal to this threshold are sent. Admins tune it to control logging verbosity, balancing visibility into problems against the volume of log traffic generated. For example, setting this to warning(4) means only emergency, alert, critical, error, and warning-level messages are sent, while notice, informational, and debug messages are suppressed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.31.1.5 snmpwalk -v2c -c public <target> PDN-SYSLOG-MIB::pdnSyslogSeverityThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.31.1.5.1 snmpget -v2c -c public <target> PDN-SYSLOG-MIB::pdnSyslogSeverityThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.31.1.5.1 i <value>
Start monitoring Paradyne (PDN) xDSL access multiplexer/modem (syslog forwarding configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-SYSLOG-MIB::pdnSyslogSeverityThreshold OID value, configure state conditions and alerts, and monitor any Paradyne (PDN) xDSL access multiplexer/modem (syslog forwarding configuration) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.31 | pdn_syslog | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.31.1 | pdnSyslog | PDN-SYSLOG-MIB |
| 1.3.6.1.4.1.1795.2.24.2.31.1.5 | pdnSyslogSeverityThreshold | PDN-SYSLOG-MIB |