All MIBs › PDN-STACKABLE-MIB › wanInterface
wanInterface
Module: PDN-STACKABLE-MIB
OID (symbolic): PDN-STACKABLE-MIB::wanInterface
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.36.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This object allows the WAN interface to be selected. Given that the syntax for this object is BITS, it is intented that the implementation could support multiple-simulatneous uplinks.
There is no default value suggested or specified with a DEFVAL directive. The intent is that the particular project using this MIB object will specify its own default value. It seems like projects using this MIB object may be different enough that it would not be a good idea to specify a default here.
What is wanInterface?
This read-write BITS value selects which WAN interface(s), such as stack links 1 through 18 or the plug-in module, are active on a Paradyne stackable unit, with the BITS syntax allowing multiple simultaneous uplinks to be selected. An admin sets this to configure which physical uplink paths the stackable device uses, and because no default is mandated by the MIB, the specific default depends on the implementing product. For example, an admin might set both the stackLink1(0) and plugInModule(2) bits to enable a redundant uplink combining a stack link and an inserted WAN module.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.36.1.1 snmpwalk -v2c -c public <target> PDN-STACKABLE-MIB::wanInterface
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.36.1.1.1 snmpget -v2c -c public <target> PDN-STACKABLE-MIB::wanInterface.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.36.1.1.1 s <value>
Start monitoring Paradyne stackable access equipment/DSLAM (stack topology/unit membership) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-STACKABLE-MIB::wanInterface OID value, configure state conditions and alerts, and monitor any Paradyne stackable access equipment/DSLAM (stack topology/unit membership) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.36 | pdnStackable | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.36.1 | pdnStackableObjects | PDN-STACKABLE-MIB |
| 1.3.6.1.4.1.1795.2.24.2.36.1.1 | wanInterface | PDN-STACKABLE-MIB |