PDN-STACKABLE-MIB :: pdnStackUnitComFailureTrapEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PDN-STACKABLE-MIB › pdnStackUnitComFailureTrapEnable

pdnStackUnitComFailureTrapEnable

Module: PDN-STACKABLE-MIB

OID (symbolic): PDN-STACKABLE-MIB::pdnStackUnitComFailureTrapEnable

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.36.1.6

Node type: OBJECT-TYPE

Type: SwitchState

Access: read-write

Description: Indicates whether the pdnStackUnitComFailure trap should be generated. The following values are defined for this object: enabled(1) - Generates the trap disabled(2) - Does not generate the trap

What is pdnStackUnitComFailureTrapEnable?

This read-write value enables or disables generation of the pdnStackUnitComFailure trap, which fires when communication is lost with a unit that was part of the stack, with enabled(1) and disabled(2) as the defined states. An admin enables this trap to be alerted promptly when a stack member becomes unreachable, critical for catching hardware or cabling failures within the stack quickly. For example, with pdnStackUnitComFailureTrapEnable set to enabled(1), the admin would receive an immediate notification if a stack link to one unit is severed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.36.1.6
snmpwalk -v2c -c public <target> PDN-STACKABLE-MIB::pdnStackUnitComFailureTrapEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.36.1.6.1
snmpget -v2c -c public <target> PDN-STACKABLE-MIB::pdnStackUnitComFailureTrapEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.36.1.6.1 s <value>

Start monitoring Paradyne stackable access equipment/DSLAM (stack topology/unit membership) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-STACKABLE-MIB::pdnStackUnitComFailureTrapEnable OID value, configure state conditions and alerts, and monitor any Paradyne stackable access equipment/DSLAM (stack topology/unit membership) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.36pdnStackablePDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.36.1pdnStackableObjectsPDN-STACKABLE-MIB
1.3.6.1.4.1.1795.2.24.2.36.1.6pdnStackUnitComFailureTrapEnablePDN-STACKABLE-MIB