All MIBs › PDN-REACHDSL-MIB › reachDSLSpectrumMgmtLoopMeasurementMethod
reachDSLSpectrumMgmtLoopMeasurementMethod
Module: PDN-REACHDSL-MIB
OID (symbolic): PDN-REACHDSL-MIB::reachDSLSpectrumMgmtLoopMeasurementMethod
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.20.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead.
This object indicates the measurement method used in describing the Loop Length of a circuit. Following are the details of each of the options:
none(1) - Indicates that the Spectral Compliance is NOT dependant on any Loop Length measurements or configurations. loopLength(2) - The 'ConfLoopLength' object is used to determine spectral compliance. The 'ConfEWL' & 'ConfQuadMode' objects are not used in this mode. ewl(3) - The 'ConfEWL' object is used to configure the estimated loop length, which is used to determine spectral compliance. In this mode the 'ConfLoopLength' & 'ConfQuadMode' objects are not used. quadMode(4) - The 'ConfQuadMode' object is used to determine spectral compliance. The 'ConfEWL' & 'ConfLoopLength' objects are not used in this mode.
This object determines which of the three objects : 'ConfEWL', 'ConfLoopLength' or 'ConfQuadMode' is used (if any) to enforce spectrally compliant maximum 'Tx Rates' and the maximum allowed 'Tx Power' on a given circuit.
What is reachDSLSpectrumMgmtLoopMeasurementMethod?
Deprecated selector for which loop-length measurement method — none, loopLength, ewl, or quadMode — determines spectral compliance on this circuit, dictating which of the three mutually exclusive configuration objects (ConfLoopLength, ConfEWL, or ConfQuadMode) is actually in effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.20.1.6 snmpwalk -v2c -c public <target> PDN-REACHDSL-MIB::reachDSLSpectrumMgmtLoopMeasurementMethod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.20.1.6.1 snmpget -v2c -c public <target> PDN-REACHDSL-MIB::reachDSLSpectrumMgmtLoopMeasurementMethod.1
Start monitoring Paradyne ReachDSL modem/CPE and central-office DSL equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-REACHDSL-MIB::reachDSLSpectrumMgmtLoopMeasurementMethod OID value, configure state conditions and alerts, and monitor any Paradyne ReachDSL modem/CPE and central-office DSL equipment from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6 | pdn_interfaces | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20 | pdnReachDSL | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.20.1 | pdnReachDSLObjects | PDN-REACHDSL-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.6 | reachDSLSpectrumMgmtLoopMeasurementMethod | PDN-REACHDSL-MIB |