All MIBs › PDN-REACHDSL-MIB › reachDSLSpectrumMgmtConfLoopLength
reachDSLSpectrumMgmtConfLoopLength
Module: PDN-REACHDSL-MIB
OID (symbolic): PDN-REACHDSL-MIB::reachDSLSpectrumMgmtConfLoopLength
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead.
This entry specifies the loop length for the line. The configurable values are short(1), medium(2) and long(3). The 'Loop Length' feature can be used only if the 'reachDSLSpectrumMgmtSelection' object is Enabled and the 'LoopMeasurementMethod' is 'loopLength'. Changing this object may limit the maximum transmit power and the effective DSL speeds at which ports train up.
Note: This object shares a mutual exclusion relationship with the 'ConfEWL' & 'ConfQuadMode' objects. i.e. only one of the three can be used for configuration at one time.
What is reachDSLSpectrumMgmtConfLoopLength?
Deprecated short/medium/long loop-length setting for the line, usable only when Spectrum Management is enabled and reachDSLSpectrumMgmtLoopMeasurementMethod is 'loopLength'; mutually exclusive with the EWL and quad-mode configuration objects. Changing it can limit the port's max transmit power and effective DSL training speed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.2 snmpwalk -v2c -c public <target> PDN-REACHDSL-MIB::reachDSLSpectrumMgmtConfLoopLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.2.1 snmpget -v2c -c public <target> PDN-REACHDSL-MIB::reachDSLSpectrumMgmtConfLoopLength.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.2.1 i <value>
Start monitoring Paradyne ReachDSL modem/CPE and central-office DSL equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-REACHDSL-MIB::reachDSLSpectrumMgmtConfLoopLength OID value, configure state conditions and alerts, and monitor any Paradyne ReachDSL modem/CPE and central-office DSL equipment from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6 | pdn_interfaces | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20 | pdnReachDSL | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.20.1 | pdnReachDSLObjects | PDN-REACHDSL-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.3 | reachDSLSpectrumMgmtConfTable | PDN-REACHDSL-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1 | reachDSLSpectrumMgmtConfEntry | PDN-REACHDSL-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.2 | reachDSLSpectrumMgmtConfLoopLength | PDN-REACHDSL-MIB |