All MIBs › PDN-REACHDSL-MIB › reachDSLSpectrumMgmtConfEWL
reachDSLSpectrumMgmtConfEWL
Module: PDN-REACHDSL-MIB
OID (symbolic): PDN-REACHDSL-MIB::reachDSLSpectrumMgmtConfEWL
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead.
The Equivalent Working Length (EWL). The value selected corresponds to the estimated length of the line in
feet - if 'EWLUnits' object is 'feet'. meters - if 'EWLUnits' object is 'meters'.
This value is usually specified by the carrier and MUST be in integral multiples of
500 feet, if 'EWLUnits' is 'feet'. 200 meters, if 'EWLUnits' is 'meters'.
The range of values that this object can take is determined by the 'MinEWL' and 'MaxEWL' objects. Changing this object may limit the maximum transmit power and the effective DSL speeds at which the ports train up.
Note: This object will be used only if Spectrum Management is enabled and 'LoopMeasurementMethod' is 'ewl'. This object shares a mutual exclusion relationship with 'ConfLoopLength' & 'ConfQuadMode' objects, as only one of the three will be used for configuration at any given instant of time.
What is reachDSLSpectrumMgmtConfEWL?
Deprecated Equivalent Working Length setting for the DSL line (in feet or meters per reachDSLSpectrumMgmtEWLUnits), which must be an integral multiple of 500 feet or 200 meters; the newer pdn_spectrumMgmt.mib object should be used instead. Only used when Spectrum Management is enabled and reachDSLSpectrumMgmtLoopMeasurementMethod is 'ewl'; it's mutually exclusive with the loop-length and quad-mode configuration objects.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.1 snmpwalk -v2c -c public <target> PDN-REACHDSL-MIB::reachDSLSpectrumMgmtConfEWL
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.1.1 snmpget -v2c -c public <target> PDN-REACHDSL-MIB::reachDSLSpectrumMgmtConfEWL.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.1.1 i <value>
Start monitoring Paradyne ReachDSL modem/CPE and central-office DSL equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-REACHDSL-MIB::reachDSLSpectrumMgmtConfEWL OID value, configure state conditions and alerts, and monitor any Paradyne ReachDSL modem/CPE and central-office DSL equipment from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6 | pdn_interfaces | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20 | pdnReachDSL | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.20.1 | pdnReachDSLObjects | PDN-REACHDSL-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.3 | reachDSLSpectrumMgmtConfTable | PDN-REACHDSL-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1 | reachDSLSpectrumMgmtConfEntry | PDN-REACHDSL-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.1 | reachDSLSpectrumMgmtConfEWL | PDN-REACHDSL-MIB |