PDN-MGMT-IP-MIB :: pdnMgmtBootVpi

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › PDN-MGMT-IP-MIB › pdnMgmtBootVpi

pdnMgmtBootVpi

Module: PDN-MGMT-IP-MIB

OID (symbolic): PDN-MGMT-IP-MIB::pdnMgmtBootVpi

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.8

Node type: OBJECT-TYPE

Type: AtmVpIdentifier

Access: read-write

Description: The VPI of the ATM PVC to be used by BOOTP or DHCP client, if the pdnMgmtIpConfigMode is set to 'bootp' or 'dhcp' respectively.

Even if the IP port (interface) is configured for 'manual' configuration, the value of this object can be modified to indicate the default ATM PVC's VPI for BOOTP or DHCP to operate on.

This object is valid only if the IP Port has ATM PVC(s) as the underlying data link media. For IP Ports over ethernet type of media, the MAX-ACCESS for this object is read-only, and the object is set to 0 always.

What is pdnMgmtBootVpi?

This object specifies the VPI of the ATM PVC that the BOOTP or DHCP client should use, applicable only when the port runs over ATM PVCs; it's forced to 0 and read-only for Ethernet-based ports. Admins set this to identify which specific ATM virtual path the DHCP/BOOTP client should operate on for this management port. For example, an admin configuring an ATM-based management port for DHCP would set this to the VPI value matching the intended PVC, such as 0.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.8
snmpwalk -v2c -c public <target> PDN-MGMT-IP-MIB::pdnMgmtBootVpi

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.8.1
snmpget -v2c -c public <target> PDN-MGMT-IP-MIB::pdnMgmtBootVpi.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.8.1 s <value>

Start monitoring Paradyne Networks DSLAM (out-of-band management IP interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-MGMT-IP-MIB::pdnMgmtBootVpi OID value, configure state conditions and alerts, and monitor any Paradyne Networks DSLAM (out-of-band management IP interface) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.21pdnMgmtIpMIBPDN-MGMT-IP-MIB
1.3.6.1.4.1.1795.2.24.2.6.21.1pdnMgmtIpConfObjectsPDN-MGMT-IP-MIB
1.3.6.1.4.1.1795.2.24.2.6.21.1.1pdnMgmtIpPortTablePDN-MGMT-IP-MIB
1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1pdnMgmtIpPortEntryPDN-MGMT-IP-MIB
1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.8pdnMgmtBootVpiPDN-MGMT-IP-MIB