PDN-MGMT-IP-MIB :: pdnMgmtBootVci

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › PDN-MGMT-IP-MIB › pdnMgmtBootVci

pdnMgmtBootVci

Module: PDN-MGMT-IP-MIB

OID (symbolic): PDN-MGMT-IP-MIB::pdnMgmtBootVci

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.9

Node type: OBJECT-TYPE

Type: AtmVcIdentifier

Access: read-write

Description: The VCI of the ATM PVC to be used by BOOTP or DHCP client, if the pdnMgmtIpConfigMode is set to 'bootp' or 'dhcp' respectively.

Even if the IP port (interface) is configured for 'manual' configuration, the value of this object can be modified to indicate the default ATM PVC's VCI for BOOTP or DHCP to operate on.

This object is valid only if the IP Port has ATM PVC(s) as the underlying data link media. For IP Ports over ethernet type of media, the MAX-ACCESS for this object is read-only, and the object is set to 0 always.

What is pdnMgmtBootVci?

This object specifies the VCI of the ATM PVC that the BOOTP or DHCP client should use, applicable only when the port runs over ATM PVCs; it's forced to 0 and read-only for Ethernet-based ports. Admins set this alongside pdnMgmtBootVpi to fully identify the ATM virtual circuit the DHCP/BOOTP client should use. For example, an admin configuring an ATM-based management port for BOOTP would set this to the VCI value matching the intended PVC, such as 35.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.9
snmpwalk -v2c -c public <target> PDN-MGMT-IP-MIB::pdnMgmtBootVci

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.9.1
snmpget -v2c -c public <target> PDN-MGMT-IP-MIB::pdnMgmtBootVci.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.9.1 s <value>

Start monitoring Paradyne Networks DSLAM (out-of-band management IP interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-MGMT-IP-MIB::pdnMgmtBootVci OID value, configure state conditions and alerts, and monitor any Paradyne Networks DSLAM (out-of-band management IP interface) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.21pdnMgmtIpMIBPDN-MGMT-IP-MIB
1.3.6.1.4.1.1795.2.24.2.6.21.1pdnMgmtIpConfObjectsPDN-MGMT-IP-MIB
1.3.6.1.4.1.1795.2.24.2.6.21.1.1pdnMgmtIpPortTablePDN-MGMT-IP-MIB
1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1pdnMgmtIpPortEntryPDN-MGMT-IP-MIB
1.3.6.1.4.1.1795.2.24.2.6.21.1.1.1.9pdnMgmtBootVciPDN-MGMT-IP-MIB