All MIBs › PDN-LINK-FAULT-MGMT-MIB › pdnLinkFaultMgmtApsSelection
pdnLinkFaultMgmtApsSelection
Module: PDN-LINK-FAULT-MGMT-MIB
OID (symbolic): PDN-LINK-FAULT-MGMT-MIB::pdnLinkFaultMgmtApsSelection
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.40.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to enable or disable the Automatic Protection Switching (Aps) feature on this device. This object can not be enabled if the -Switchover due to link failures- is enabled.
What is pdnLinkFaultMgmtApsSelection?
This read-write INTEGER enables or disables Automatic Protection Switching (APS) on the device, and cannot be set to enabled if link-failure-based switchover is already enabled, since the two mechanisms are mutually exclusive. Admins toggle this to choose APS as the protection scheme for a redundant link pair instead of the device's own link-failure switchover logic. For example, an admin deploying a SONET APS ring would set pdnLinkFaultMgmtApsSelection to enabled(1), which would then block enabling pdnLinkFaultMgmtSwitchoverSelection at the same time.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.40.1.1.1 snmpwalk -v2c -c public <target> PDN-LINK-FAULT-MGMT-MIB::pdnLinkFaultMgmtApsSelection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.40.1.1.1.1 snmpget -v2c -c public <target> PDN-LINK-FAULT-MGMT-MIB::pdnLinkFaultMgmtApsSelection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.40.1.1.1.1 i <value>
Start monitoring Paradyne access/transport equipment with protected primary/secondary links (Ethernet OAM link fault management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-LINK-FAULT-MGMT-MIB::pdnLinkFaultMgmtApsSelection OID value, configure state conditions and alerts, and monitor any Paradyne access/transport equipment with protected primary/secondary links (Ethernet OAM link fault management) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40 | pdnLinkFaultMgmt | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.40.1 | pdnLinkFaultMgmtMIB | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1 | pdnLinkFaultMgmtMIBObjects | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1.1 | pdnLinkFaultMgmtApsSelection | PDN-LINK-FAULT-MGMT-MIB |