All MIBs › PDN-LINK-FAULT-MGMT-MIB › pdnLinkFailureLOFPeriodBeforeSwitching
pdnLinkFailureLOFPeriodBeforeSwitching
Module: PDN-LINK-FAULT-MGMT-MIB
OID (symbolic): PDN-LINK-FAULT-MGMT-MIB::pdnLinkFailureLOFPeriodBeforeSwitching
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object allows users to configure the amount of time a LOF condition shall exist on this uplink before initiating a switchover.
Switchover due to LOF condition on this uplink will not be valid if any of the APS (Automatic Protection Switching) is enabled.
What is pdnLinkFailureLOFPeriodBeforeSwitching?
This read-write Integer32 (0-300 seconds), indexed per interface, sets how long a Loss of Frame (LOF) condition must persist on the primary uplink before the device switches over to the alternate link; like the LOS timer, it is inactive whenever APS is enabled. Admins configure this to control how tolerant the device is of transient framing errors before triggering a failover. For example, a value of 10 seconds means the primary link must stay out of frame sync for a full 10 seconds before pdnLinkFailureLOFPeriodBeforeSwitching triggers the switchover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.2 snmpwalk -v2c -c public <target> PDN-LINK-FAULT-MGMT-MIB::pdnLinkFailureLOFPeriodBeforeSwitching
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.2.1 snmpget -v2c -c public <target> PDN-LINK-FAULT-MGMT-MIB::pdnLinkFailureLOFPeriodBeforeSwitching.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.2.1 i <value>
Start monitoring Paradyne access/transport equipment with protected primary/secondary links (Ethernet OAM link fault management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-LINK-FAULT-MGMT-MIB::pdnLinkFailureLOFPeriodBeforeSwitching OID value, configure state conditions and alerts, and monitor any Paradyne access/transport equipment with protected primary/secondary links (Ethernet OAM link fault management) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40 | pdnLinkFaultMgmt | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.40.1 | pdnLinkFaultMgmtMIB | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1 | pdnLinkFaultMgmtMIBObjects | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1.3 | pdnLinkFailureConfigTable | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1 | pdnLinkFailureConfigEntry | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.2 | pdnLinkFailureLOFPeriodBeforeSwitching | PDN-LINK-FAULT-MGMT-MIB |