All MIBs › PDN-LINK-FAULT-MGMT-MIB › pdnLinkFailureAISLPeriodBeforeSwitching
pdnLinkFailureAISLPeriodBeforeSwitching
Module: PDN-LINK-FAULT-MGMT-MIB
OID (symbolic): PDN-LINK-FAULT-MGMT-MIB::pdnLinkFailureAISLPeriodBeforeSwitching
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object allows users to configure the amount of time a AIS-L condition shall exist on this uplink before initiating a switchover.
Switchover due to AIS-L condition on this uplink will not be valid if any of the APS (Automatic Protection Switching) is enabled.
What is pdnLinkFailureAISLPeriodBeforeSwitching?
This read-write Integer32 (0-300 seconds), indexed per interface, sets how long an incoming line AIS (Alarm Indication Signal) condition must persist on the primary uplink before the device switches to the alternate link, and is only effective when APS is not enabled. Admins use it to decide how quickly the device reacts to an upstream carrier-reported line failure signaled via AIS. For example, setting pdnLinkFailureAISLPeriodBeforeSwitching to 3 seconds causes a rapid failover as soon as the carrier signals a sustained AIS-L condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.3 snmpwalk -v2c -c public <target> PDN-LINK-FAULT-MGMT-MIB::pdnLinkFailureAISLPeriodBeforeSwitching
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.3.1 snmpget -v2c -c public <target> PDN-LINK-FAULT-MGMT-MIB::pdnLinkFailureAISLPeriodBeforeSwitching.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> pdnLinkFailureAISLPeriodBeforeSwitching.1
Start monitoring Paradyne access/transport equipment with protected primary/secondary links (Ethernet OAM link fault management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-LINK-FAULT-MGMT-MIB::pdnLinkFailureAISLPeriodBeforeSwitching OID value, configure state conditions and alerts, and monitor any Paradyne access/transport equipment with protected primary/secondary links (Ethernet OAM link fault management) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40 | pdnLinkFaultMgmt | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.40.1 | pdnLinkFaultMgmtMIB | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1 | pdnLinkFaultMgmtMIBObjects | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1.3 | pdnLinkFailureConfigTable | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1 | pdnLinkFailureConfigEntry | PDN-LINK-FAULT-MGMT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.3 | pdnLinkFailureAISLPeriodBeforeSwitching | PDN-LINK-FAULT-MGMT-MIB |