PDN-DS1EXT-MIB :: pdnDs1ExtConfLineLength

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPDN-DS1EXT-MIBpdnDs1ExtConfLineLength

pdnDs1ExtConfLineLength

Module: PDN-DS1EXT-MIB

OID (symbolic): PDN-DS1EXT-MIB::pdnDs1ExtConfLineLength

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This entry specifies the loop length, in feet, for a short-haul DS1 line. This object only applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with the pdnDs1ExtConfLineBuildOut object i.e. only one of the two can be used for configuration at one time, based on the pdnDs1ExtConfLineLengthType object.

What is pdnDs1ExtConfLineLength?

This specifies the cable length, in one of five feet ranges, for a short-haul DS1 interface, and only applies when the line-length-type object is set to short-haul. Administrators use it to have the interface apply the correct pulse equalization for the actual distance of the cable run, and it's mutually exclusive with the line-build-out setting used for long-haul lines. For a DS1 cable running about 300 feet within a building, an admin would select feet267To399 rather than leaving the default feet000To133.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.2
snmpwalk -v2c -c public <target> PDN-DS1EXT-MIB::pdnDs1ExtConfLineLength

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.2.1
snmpget -v2c -c public <target> PDN-DS1EXT-MIB::pdnDs1ExtConfLineLength.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.2.1 i <value>

Start monitoring Paradyne WAN access equipment, DS1/G.703 E1 interfaces (line build-out extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-DS1EXT-MIB::pdnDs1ExtConfLineLength OID value, configure state conditions and alerts, and monitor any Paradyne WAN access equipment, DS1/G.703 E1 interfaces (line build-out extensions) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6.5ent_ds1PDN-DS1CONFIG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.5.5pdnDs1ExtPDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1pdnDs1ExtObjectsPDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1pdnDs1ExtConfTablePDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1pdnDs1ExtConfEntryPDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.2pdnDs1ExtConfLineLengthPDN-DS1EXT-MIB