PDN-DS1EXT-MIB :: pdnDs1ExtConfLineBuildOut

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPDN-DS1EXT-MIBpdnDs1ExtConfLineBuildOut

pdnDs1ExtConfLineBuildOut

Module: PDN-DS1EXT-MIB

OID (symbolic): PDN-DS1EXT-MIB::pdnDs1ExtConfLineBuildOut

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This entry specifies the line build out, in decibels, for a long-haul DS1 line. dB0Pnt0 = 0.0 dB dB7Pnt5 = -7.5 dB dB15Pnt0 = -15.0 dB dB22Pnt5 = -22.5 dB This object only applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with the pdnDs1ExtConfLineLength object i.e. only one of the two can be used for configuration at one time, based on the pdnDs1ExtConfLineLengthType object.

What is pdnDs1ExtConfLineBuildOut?

This sets the transmit signal attenuation, in decibels, applied to a long-haul DS1 interface to match the line's cable loss characteristics, and it only applies when the interface is configured for long-haul operation. Administrators tune this value so the transmitted signal isn't so strong that it overdrives the receiving equipment on a shorter long-haul run, choosing among four preset attenuation levels from 0.0 dB up to 22.5 dB. For a long-haul DS1 run needing moderate attenuation, an admin might set this to dB15Pnt0, applying 15.0 dB of build-out rather than the 0.0 dB default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.3
snmpwalk -v2c -c public <target> PDN-DS1EXT-MIB::pdnDs1ExtConfLineBuildOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.3.1
snmpget -v2c -c public <target> PDN-DS1EXT-MIB::pdnDs1ExtConfLineBuildOut.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.3.1 i <value>

Start monitoring Paradyne WAN access equipment, DS1/G.703 E1 interfaces (line build-out extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-DS1EXT-MIB::pdnDs1ExtConfLineBuildOut OID value, configure state conditions and alerts, and monitor any Paradyne WAN access equipment, DS1/G.703 E1 interfaces (line build-out extensions) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6.5ent_ds1PDN-DS1CONFIG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.5.5pdnDs1ExtPDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1pdnDs1ExtObjectsPDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1pdnDs1ExtConfTablePDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1pdnDs1ExtConfEntryPDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.3pdnDs1ExtConfLineBuildOutPDN-DS1EXT-MIB