PDN-DS1EXT-MIB :: pdnDs1ExtConfConnector

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPDN-DS1EXT-MIBpdnDs1ExtConfConnector

pdnDs1ExtConfConnector

Module: PDN-DS1EXT-MIB

OID (symbolic): PDN-DS1EXT-MIB::pdnDs1ExtConfConnector

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This entry specifies the type of connector to be used. This object only applies to G.703 interfaces.

bnc: 75-Ohm connector supporting only short-haul. rj48: 120-Ohm connector supporting both short-haul and long-haul.

What is pdnDs1ExtConfConnector?

This selects the physical connector type used on a G.703 interface - either a 75-Ohm BNC connector (which only supports short-haul cabling) or a 120-Ohm RJ-48 connector (which supports both short-haul and long-haul). Administrators set this to match the physical cabling actually installed on the device, since mismatching the connector setting against the real hardware wiring would cause signal integrity problems. If the device is wired with a twisted-pair RJ-48 jack, an admin would leave or set this to the default rj48 rather than bnc.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.4
snmpwalk -v2c -c public <target> PDN-DS1EXT-MIB::pdnDs1ExtConfConnector

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.4.1
snmpget -v2c -c public <target> PDN-DS1EXT-MIB::pdnDs1ExtConfConnector.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.4.1 i <value>

Start monitoring Paradyne WAN access equipment, DS1/G.703 E1 interfaces (line build-out extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-DS1EXT-MIB::pdnDs1ExtConfConnector OID value, configure state conditions and alerts, and monitor any Paradyne WAN access equipment, DS1/G.703 E1 interfaces (line build-out extensions) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6.5ent_ds1PDN-DS1CONFIG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.5.5pdnDs1ExtPDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1pdnDs1ExtObjectsPDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1pdnDs1ExtConfTablePDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1pdnDs1ExtConfEntryPDN-DS1EXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.4pdnDs1ExtConfConnectorPDN-DS1EXT-MIB