PDN-DOT1QEXT-MIB :: pdnDot1qVlanStaticUplink

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › PDN-DOT1QEXT-MIB › pdnDot1qVlanStaticUplink

pdnDot1qVlanStaticUplink

Module: PDN-DOT1QEXT-MIB

OID (symbolic): PDN-DOT1QEXT-MIB::pdnDot1qVlanStaticUplink

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This is used to configure the port number of the port on which all frames belonging to secure VLAN are to be forwarded. This object is not valid unless pdnDot1qVlanStaticSecureModeStatus is set to ENABLED. If pdnDot1qVlanStaticSecureModeStatus is disabled this object will read 0 port.

What is pdnDot1qVlanStaticUplink?

This read-write value configures the port number to which all frames belonging to this secure VLAN are forwarded, valid only when pdnDot1qVlanStaticSecureModeStatus is enabled, and reading as port 0 when secure mode is disabled. An admin sets it to designate the single uplink port that carries all traffic out of an isolated secure VLAN, since secure-mode hosts cannot communicate laterally with other VLANs. For example, an admin isolating a customer VLAN would set this to the uplink port connecting to the router or aggregation device that handles that VLAN's traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.3
snmpwalk -v2c -c public <target> PDN-DOT1QEXT-MIB::pdnDot1qVlanStaticUplink

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.3.1
snmpget -v2c -c public <target> PDN-DOT1QEXT-MIB::pdnDot1qVlanStaticUplink.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.3.1 i <value>

Start monitoring Paradyne VLAN-aware access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-DOT1QEXT-MIB::pdnDot1qVlanStaticUplink OID value, configure state conditions and alerts, and monitor any Paradyne VLAN-aware access devices from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.39pdn_dot1qPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.39.1pdnDot1qExtPDN-DOT1QEXT-MIB
1.3.6.1.4.1.1795.2.24.2.39.1.1pdnDot1qExtObjectsPDN-DOT1QEXT-MIB
1.3.6.1.4.1.1795.2.24.2.39.1.1.1pdnDot1qVlanStaticExtTablePDN-DOT1QEXT-MIB
1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1pdnDot1qVlanStaticExtEntryPDN-DOT1QEXT-MIB
1.3.6.1.4.1.1795.2.24.2.39.1.1.1.1.3pdnDot1qVlanStaticUplinkPDN-DOT1QEXT-MIB