PDN-BRIDGE-MIB :: pdnDot1dTpFdbStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PDN-BRIDGE-MIB › pdnDot1dTpFdbStatus

pdnDot1dTpFdbStatus

Module: PDN-BRIDGE-MIB

OID (symbolic): PDN-BRIDGE-MIB::pdnDot1dTpFdbStatus

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.21.1.2.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The status of this entry. The meanings of the values are:

other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of pdnDot1dTpFdbPort, nor an entry in the pdnDot1dStaticTable) in being used to determine if and how frames addressed to the value of the corresponding instance of pdnDot1dTpFdbAddress are being forwarded.

invalid(2) : this entry is not longer valid (e.g., it was learned but has since

aged-out), but has not yet been flushed from the table.

learned(3) : the value of the corresponding instance of pdnDot1dTpFdbPort was learned, and is being used.

self(4) : the value of the corresponding instance of pdnDot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of pdnDot1dTpFdbPort indicates which of the bridge's ports has this address.

mgmt(5) : the value of the corresponding instance of pdnDot1dTpFdbAddress is

also the value of an existing instance of pdnDot1dStaticAddress.

What is pdnDot1dTpFdbStatus?

pdnDot1dTpFdbStatus reports the status of a Forwarding Database entry as one of other, invalid, learned, self, or mgmt, per the standard bridge MIB semantics. Admins use this to distinguish dynamically learned entries from ones representing the bridge's own addresses (self) or statically configured addresses (mgmt), and to spot stale invalid entries awaiting flush. For example, an entry reporting self(4) identifies one of the bridge's own MAC addresses rather than a learned client address, while learned(3) is the normal case for a dynamically discovered device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.21.1.2.1.1.4
snmpwalk -v2c -c public <target> PDN-BRIDGE-MIB::pdnDot1dTpFdbStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.21.1.2.1.1.4.1
snmpget -v2c -c public <target> PDN-BRIDGE-MIB::pdnDot1dTpFdbStatus.1

Start monitoring Paradyne DSL/access bridging devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-BRIDGE-MIB::pdnDot1dTpFdbStatus OID value, configure state conditions and alerts, and monitor any Paradyne DSL/access bridging devices from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.21pdn_bridgePDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.21.1pdnBridgeGenericMIBObjectsPDN-BRIDGE-MIB
1.3.6.1.4.1.1795.2.24.2.21.1.2pdnDot1dTpFdbPDN-BRIDGE-MIB
1.3.6.1.4.1.1795.2.24.2.21.1.2.1pdnDot1dTpFdbTablePDN-BRIDGE-MIB
1.3.6.1.4.1.1795.2.24.2.21.1.2.1.1pdnDot1dTpFdbEntryPDN-BRIDGE-MIB
1.3.6.1.4.1.1795.2.24.2.21.1.2.1.1.4pdnDot1dTpFdbStatusPDN-BRIDGE-MIB