PDN-ATMEXT-MIB :: pdnAtmIfConfExtOcdEventThreshold

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PDN-ATMEXT-MIB › pdnAtmIfConfExtOcdEventThreshold

pdnAtmIfConfExtOcdEventThreshold

Module: PDN-ATMEXT-MIB

OID (symbolic): PDN-ATMEXT-MIB::pdnAtmIfConfExtOcdEventThreshold

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.5

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The value of this object represents the threshold value for the number of Out of Cell Delineation(OCD) events in a 15 minutes interval. An SNMP trap would be generated if the number of OCD events in a 15 minutes interval exceeds this threshold. The valid range of this object is 0 to 1000. A value of 0 will cause a trap to be sent on each occurrence of a HEC error. A value of -9999 disables the threshold check. The default value for this object is 0

What is pdnAtmIfConfExtOcdEventThreshold?

This read-write integer sets the number of Out-of-Cell-Delineation (OCD) events allowed within a 15-minute interval before an SNMP trap is generated, with a default of 0 (trap on every occurrence) and -9999 disabling the check. Admins tune this to detect when the receiver is losing synchronization with the incoming ATM cell stream, a sign of a failing physical link. For example, leaving this at its default of 0 means the very first OCD event on the interface triggers an immediate alert.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.5
snmpwalk -v2c -c public <target> PDN-ATMEXT-MIB::pdnAtmIfConfExtOcdEventThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.5.1
snmpget -v2c -c public <target> PDN-ATMEXT-MIB::pdnAtmIfConfExtOcdEventThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.5.1 i <value>

Start monitoring Paradyne ATM/DSL access equipment (VC bandwidth/HEC threshold extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-ATMEXT-MIB::pdnAtmIfConfExtOcdEventThreshold OID value, configure state conditions and alerts, and monitor any Paradyne ATM/DSL access equipment (VC bandwidth/HEC threshold extensions) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6.11pdnAtmPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.11.5pdnAtmExtMIBPDN-ATMEXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.11.5.1pdnAtmExtMIBObjectsPDN-ATMEXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1pdnAtmIfConfExtTablePDN-ATMEXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1pdnAtmIfConfExtEntryPDN-ATMEXT-MIB
1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.5pdnAtmIfConfExtOcdEventThresholdPDN-ATMEXT-MIB