All MIBs › PDN-ATMEXT-MIB › pdnAtmIfConfExtHecErrorThreshold
pdnAtmIfConfExtHecErrorThreshold
Module: PDN-ATMEXT-MIB
OID (symbolic): PDN-ATMEXT-MIB::pdnAtmIfConfExtHecErrorThreshold
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The value of this object represents the threshold value for the number of uncrorrectable HEC errors in a 15 minutes interval. An SNMP link Up/Down trap would be generated if the number of uncorrectable HEC errors in a 15 minutes interval exceeds this threshold. The valid range of this object is 0 to 1000. A value of 0 will cause a trap to be sent on each occurrence of a HEC error. A value of -9999 disables the threshold check. The default value for this object is 100.
What is pdnAtmIfConfExtHecErrorThreshold?
This read-write integer sets the number of uncorrectable Header Error Control (HEC) errors allowed within a 15-minute interval before the switch sends an SNMP link Up/Down trap, with a default of 100, 0 meaning trap on every error, and -9999 disabling the check entirely. Admins tune this to control sensitivity to physical-layer cell errors on the ATM link. For example, lowering this from the default 100 to 20 would make the switch alert much sooner on a degrading ATM physical link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.3 snmpwalk -v2c -c public <target> PDN-ATMEXT-MIB::pdnAtmIfConfExtHecErrorThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.3.1 snmpget -v2c -c public <target> PDN-ATMEXT-MIB::pdnAtmIfConfExtHecErrorThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.3.1 i <value>
Start monitoring Paradyne ATM/DSL access equipment (VC bandwidth/HEC threshold extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-ATMEXT-MIB::pdnAtmIfConfExtHecErrorThreshold OID value, configure state conditions and alerts, and monitor any Paradyne ATM/DSL access equipment (VC bandwidth/HEC threshold extensions) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6 | pdn_interfaces | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.11 | pdnAtm | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.11.5 | pdnAtmExtMIB | PDN-ATMEXT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.11.5.1 | pdnAtmExtMIBObjects | PDN-ATMEXT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1 | pdnAtmIfConfExtTable | PDN-ATMEXT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1 | pdnAtmIfConfExtEntry | PDN-ATMEXT-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.3 | pdnAtmIfConfExtHecErrorThreshold | PDN-ATMEXT-MIB |