PDN-ADSL-SELT-MIB :: pdnAdslSeltWireSize

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › PDN-ADSL-SELT-MIB › pdnAdslSeltWireSize

pdnAdslSeltWireSize

Module: PDN-ADSL-SELT-MIB

OID (symbolic): PDN-ADSL-SELT-MIB::pdnAdslSeltWireSize

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.31.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object permits the selection of the metric unit to be used when reporting SELT test results. (i.e for AWG results are in feet and for metric/metricJapan results are in meters).

This configuration parameter applies to all the SELT tests run in the device.

What is pdnAdslSeltWireSize?

This setting selects which measurement unit system, AWG feet, metric meters, or metric-Japan meters, is used when reporting SELT, Single-Ended Line Test, results. Admins configure it to match their regional or organizational standard for reporting cable length and gauge on ADSL lines, since it applies to all SELT tests run on the device. A US-based admin would typically leave pdnAdslSeltWireSize at awg(1) so results are reported in feet using AWG wire gauge conventions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.31.1.1
snmpwalk -v2c -c public <target> PDN-ADSL-SELT-MIB::pdnAdslSeltWireSize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.31.1.1.1
snmpget -v2c -c public <target> PDN-ADSL-SELT-MIB::pdnAdslSeltWireSize.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.31.1.1.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> pdnAdslSeltWireSize.1

Start monitoring Paradyne ADSL line card/DSLAM (Single-Ended Line Test) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-ADSL-SELT-MIB::pdnAdslSeltWireSize OID value, configure state conditions and alerts, and monitor any Paradyne ADSL line card/DSLAM (Single-Ended Line Test) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.31pdnAdslSeltMIBPDN-ADSL-SELT-MIB
1.3.6.1.4.1.1795.2.24.2.6.31.1pdnAdslSeltObjectsPDN-ADSL-SELT-MIB
1.3.6.1.4.1.1795.2.24.2.6.31.1.1pdnAdslSeltWireSizePDN-ADSL-SELT-MIB