PDN-ADSL-SELT-MIB :: pdnAdslSeltStatus

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › PDN-ADSL-SELT-MIB › pdnAdslSeltStatus

pdnAdslSeltStatus

Module: PDN-ADSL-SELT-MIB

OID (symbolic): PDN-ADSL-SELT-MIB::pdnAdslSeltStatus

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object provides status about any SELT test running or ever run (since last reset) on an ADSL interface. This object can be read by NMS managers to determine the status of a test; that is:

inProgress (1) - if the test is currently running.

stoppedInProgress (2) - if a request to stop the test is still in progress.

complete (3) - if the test has been run at least once since system reset and has completed.

notStarted (4) - if the test has not been run on this interface since last system reset.

resultsCleared (5) - if the entry in the test results table, Lc or Lnf, was removed as the result of the execution of the clearResults(4) pdnAdslSeltCmd.

What is pdnAdslSeltStatus?

This reports the current status of a SELT test on an ADSL interface, such as running, stopping, completed, never run, or having had its results cleared. Admins poll this to know when a test they started has finished, so they can then retrieve the segment or noise-floor result tables. If pdnAdslSeltStatus shows complete(3), the admin knows they can now read the pdnAdslSeltLcTable or pdnAdslSeltLnfTable for that interface's test results.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.3
snmpwalk -v2c -c public <target> PDN-ADSL-SELT-MIB::pdnAdslSeltStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.3.1
snmpget -v2c -c public <target> PDN-ADSL-SELT-MIB::pdnAdslSeltStatus.1

Start monitoring Paradyne ADSL line card/DSLAM (Single-Ended Line Test) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-ADSL-SELT-MIB::pdnAdslSeltStatus OID value, configure state conditions and alerts, and monitor any Paradyne ADSL line card/DSLAM (Single-Ended Line Test) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.31pdnAdslSeltMIBPDN-ADSL-SELT-MIB
1.3.6.1.4.1.1795.2.24.2.6.31.1pdnAdslSeltObjectsPDN-ADSL-SELT-MIB
1.3.6.1.4.1.1795.2.24.2.6.31.1.2pdnAdslSeltTablePDN-ADSL-SELT-MIB
1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1pdnAdslSeltEntryPDN-ADSL-SELT-MIB
1.3.6.1.4.1.1795.2.24.2.6.31.1.2.1.3pdnAdslSeltStatusPDN-ADSL-SELT-MIB