All MIBs › PANDATEL-FOBUS-MODEM-MIB › mdmAlarmConditionPort2
mdmAlarmConditionPort2
Module: PANDATEL-FOBUS-MODEM-MIB
OID (symbolic): PANDATEL-FOBUS-MODEM-MIB::mdmAlarmConditionPort2
OID (numeric): 1.3.6.1.4.1.760.1.1.2.1.10.501.1.1.111
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The alarm trigger mode at port 2: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'no-link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective.
What is mdmAlarmConditionPort2?
This read-write enumerated value configures the alarm trigger mode for port 2, choosing among disable(2), no-link-signal(3) for a down link, laser-fail(4) for a defective laser diode, or no-link-signal-or-laser-fail(5) for either condition (plus other(1)). Admins set this to control exactly which fault conditions on port 2 generate an alarm. For example, setting this to no-link-signal-or-laser-fail(5) ensures the unit alarms on either a dropped link or a failed transmit laser on that port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.760.1.1.2.1.10.501.1.1.111 snmpwalk -v2c -c public <target> PANDATEL-FOBUS-MODEM-MIB::mdmAlarmConditionPort2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.760.1.1.2.1.10.501.1.1.111.1 snmpget -v2c -c public <target> PANDATEL-FOBUS-MODEM-MIB::mdmAlarmConditionPort2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.760.1.1.2.1.10.501.1.1.111.1 i <value>
Start monitoring Pandatel FOBUS fiber optic bus modem with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PANDATEL-FOBUS-MODEM-MIB::mdmAlarmConditionPort2 OID value, configure state conditions and alerts, and monitor any Pandatel FOBUS fiber optic bus modem from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.760 | pandatel | PANDATEL-AGENT-MIB |
| 1.3.6.1.4.1.760.1 | mibs | PANDATEL-AGENT-MIB |
| 1.3.6.1.4.1.760.1.1 | products | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2 | wan_products | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1 | mdm_mgmt | PANDATEL-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10 | mdmSpecifics | PANDATEL-MODEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.760.1.1.2.1.10.501 | fobus | PANDATEL-FOBUS-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.501.1 | fobusModemTable | PANDATEL-FOBUS-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.501.1.1 | fobusTableEntry | PANDATEL-FOBUS-MODEM-MIB |
| 1.3.6.1.4.1.760.1.1.2.1.10.501.1.1.111 | mdmAlarmConditionPort2 | PANDATEL-FOBUS-MODEM-MIB |