PAD-OPT-MIB :: cdx6500remotepadParamNum3

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PAD-OPT-MIB › cdx6500remotepadParamNum3

cdx6500remotepadParamNum3

Module: PAD-OPT-MIB

OID (symbolic): PAD-OPT-MIB::cdx6500remotepadParamNum3

OID (numeric): 1.3.6.1.4.1.449.2.1.2.2.9.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Reference number of X.3 parameter sent to remote PAD when a connection is made to a PAD port in this node. Standard parameters and function are: 1 - PAD recall character 12 - data restraint out 2 - echo on/off 13 - insertion after 3 - forwarding, character 14 - padding 4 - forwarding, timer 15 - editing 5 - data restraint in 16 - character delete 6 - service signals 17 - line delete 7 - break handling 18 - line display 8 - discard output 19 - editing type 9 - padding 20 - echo mask 10 - line folding 21 - parity treatment 11 - speed 22 - page wait

What is cdx6500remotepadParamNum3?

The X.3 parameter number (1-22; 1=PAD recall character, 2=echo on/off, 3=forwarding character, 4=forwarding timer, 5=data restraint in, 6=service signals, 7=break handling, 8=discard output, 9=CR padding, 10=line folding, 11=speed, 12=data restraint out, 13=LF insertion after CR, 14=LF padding, 15=editing, 16=character delete, 17=line delete, 18=line display, 19=editing type, 20=echo mask, 21=parity treatment, 22=page wait) that is the third of up to 22 parameter/value pairs in this entry sent to update a remote PAD's X.3 characteristics when it connects to a port referencing this entry.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.9.1.6
snmpwalk -v2c -c public <target> PAD-OPT-MIB::cdx6500remotepadParamNum3

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.9.1.6.1
snmpget -v2c -c public <target> PAD-OPT-MIB::cdx6500remotepadParamNum3.1

Start monitoring CDX6500-series X.25/PAD access device, legacy packet-switching access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PAD-OPT-MIB::cdx6500remotepadParamNum3 OID value, configure state conditions and alerts, and monitor any CDX6500-series X.25/PAD access device, legacy packet-switching access equipment from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2cdx6500ConfigurationALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.2cdx6500CfgGeneralGroupBCST-OPT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.2.2.9cdx6500CfgRemotePadTablePAD-OPT-MIB
1.3.6.1.4.1.449.2.1.2.2.9.1cdx6500CfgRemotePadEntryPAD-OPT-MIB
1.3.6.1.4.1.449.2.1.2.2.9.1.6cdx6500remotepadParamNum3PAD-OPT-MIB