All MIBs › PAD-OPT-MIB › cdx6500padprofPar105
cdx6500padprofPar105
Module: PAD-OPT-MIB
OID (symbolic): PAD-OPT-MIB::cdx6500padprofPar105
OID (numeric): 1.3.6.1.4.1.449.2.1.2.2.8.1.28
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: #105, specifies whether both the PAD and the attached terminal are flow controlled (restrained from sending data) by the use of V.24 control signals, rather than XON, XOFF. This type of control is called out-of-band flow control. The control applies to data, commands and responses to and from an attached device: 0 - none using connector control signals 1 - Data Restraint Outbound, attached device flow controls PAD with connector pin 14 2 - Data Restraint Inbound, PAD flow controls attached device with connector pin 5, CTS X - any combination formed by summing (e.g. 1+2 or 3) For DRO control using XON/XOFF, use parameters #5 and #12.
What is cdx6500padprofPar105?
X.3 parameter #105: controls out-of-band, hardware-signal flow control using V.24 pins rather than XON/XOFF - 1 lets the attached device flow-control the PAD via pin 14, 2 lets the PAD flow-control the device via CTS/pin 5, and the values can be summed for both directions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.8.1.28 snmpwalk -v2c -c public <target> PAD-OPT-MIB::cdx6500padprofPar105
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.8.1.28.1 snmpget -v2c -c public <target> PAD-OPT-MIB::cdx6500padprofPar105.1
Start monitoring CDX6500-series X.25/PAD access device, legacy packet-switching access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PAD-OPT-MIB::cdx6500padprofPar105 OID value, configure state conditions and alerts, and monitor any CDX6500-series X.25/PAD access device, legacy packet-switching access equipment from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.2 | cdx6500CfgGeneralGroup | BCST-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.2.8 | cdx6500CfgPadProfileTable | PAD-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.8.1 | cdx6500CfgPadProfileEntry | PAD-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.8.1.28 | cdx6500padprofPar105 | PAD-OPT-MIB |