All MIBs › PAD-OPT-MIB › cdx6500padpCfgConnectionType
cdx6500padpCfgConnectionType
Module: PAD-OPT-MIB
OID (symbolic): PAD-OPT-MIB::cdx6500padpCfgConnectionType
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specify the control signal handshake and clocking required for a connection to be made to this port: simp - simple, no control signals required. dtr - dedicated, require the data terminal ready signal (DTR). dtrd - same as DTR, except data set ready (DSR) drops between calls. dtrp - same as DTR, except DSR/DCD/CTS are held low in the idle state. dimo - port handshakes with attached dial modem. dimoa - same as DIMO except DSR never raised on incoming call from modem. dimob - same as DIMO except DSR follows DTR on incoming call from modem. emri - port emulates a dial modem with ring indicator (RI). emdc - port emulates a dial modem with data carrier detect (DCD). emdcio - port emulates a dial modem with DCD for incoming and outgoing calls. newvalSimp - same functionality as 'simp', new enumeration added for RFc1155 compatibility.
What is cdx6500padpCfgConnectionType?
Sets which handshake/clocking scheme the port uses to detect a connection, such as dtr (requires DTR raised), dimo (handshakes with an attached dial modem), or emri/emdc (port emulates a modem's ring indicator or carrier detect); pick the value matching the signaling behavior of whatever DTE or modem is wired to this port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.1.1.2 snmpwalk -v2c -c public <target> PAD-OPT-MIB::cdx6500padpCfgConnectionType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.1.1.2.1 snmpget -v2c -c public <target> PAD-OPT-MIB::cdx6500padpCfgConnectionType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.2.1.1.1.1.2.1 i <value>
Start monitoring CDX6500-series X.25/PAD access device, legacy packet-switching access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PAD-OPT-MIB::cdx6500padpCfgConnectionType OID value, configure state conditions and alerts, and monitor any CDX6500-series X.25/PAD access device, legacy packet-switching access equipment from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1 | cdx6500PCTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.1.1 | cdx6500PPCTPadPortTable | PAD-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.1.1 | cdx6500PPCTPadPortEntry | PAD-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.1.1.2 | cdx6500padpCfgConnectionType | PAD-OPT-MIB |