PACKETFLUX-STANDBYPOWER :: webcontrol1

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPACKETFLUX-STANDBYPOWERwebcontrol1

webcontrol1

Module: PACKETFLUX-STANDBYPOWER

OID (symbolic): PACKETFLUX-STANDBYPOWER::webcontrol1

OID (numeric): 1.3.6.1.4.1.32050.2.2.48

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: True(1) if the webcontrol 1 virtual toggle switch is in the on position. False(2) if it is not. This value can be written to affect the position of the toggle switch.

What is webcontrol1?

A writable virtual toggle switch (webcontrol 1): reads true when the switch is in the on position, false when off, and can be written by an admin to flip the virtual switch, typically used to drive custom logic or an output tied to this control point.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.32050.2.2.48
snmpwalk -v2c -c public <target> PACKETFLUX-STANDBYPOWER::webcontrol1

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.32050.2.2.48.1
snmpget -v2c -c public <target> PACKETFLUX-STANDBYPOWER::webcontrol1.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.32050.2.2.48.1 s <value>

Start monitoring PacketFlux Technologies Standby Power Controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PACKETFLUX-STANDBYPOWER::webcontrol1 OID value, configure state conditions and alerts, and monitor any PacketFlux Technologies Standby Power Controller from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.32050packetfluxPACKETFLUX-SMI
1.3.6.1.4.1.32050.2packetfluxMgmtPACKETFLUX-SMI
Numeric OIDNameModule
1.3.6.1.4.1.32050.2.2standbypowerPACKETFLUX-STANDBYPOWER
1.3.6.1.4.1.32050.2.2.48webcontrol1PACKETFLUX-STANDBYPOWER