All MIBs › OSPFV3-MIB-JUNIPER › jnxOspfv3MulticastExtensions
jnxOspfv3MulticastExtensions
Module: OSPFV3-MIB-JUNIPER
OID (symbolic): OSPFV3-MIB-JUNIPER::jnxOspfv3MulticastExtensions
OID (numeric): 1.3.6.1.4.1.2636.5.4.1.1.1.12
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multicast Extensions to OSPF.
If intraAreaMulticast set, indicates that the router can forward IPv6 multicast datagrams in the router's directly attached areas (called intra-area multicast routing).
If interAreaMulticast set, indicates that the router can forward IPv6 multicast datagrams between OSPFv3 areas (called inter-area multicast routing).
If interAsMulticast set, indicates that the router can forward IPv6 multicast datagrams between Autonomous Systems (called inter-AS multicast routing). Only certain combinations of bit settings are allowed, namely: - All bits cleared (no multicasting) - intraAreaMulticast only, - intraAreaMulticast and interAreaMulticast, - intraAreaMulticast and interAsMulticast - intraAreaMulticast, interAreaMulticast and interAsMulticast By default, all bits are cleared.
What is jnxOspfv3MulticastExtensions?
Bitmask of which multicast-forwarding extensions this router supports: intra-area, inter-area, and inter-AS IPv6 multicast routing, with only certain bit combinations valid; all bits cleared (the default) means no multicast forwarding.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.4.1.1.1.12 snmpwalk -v2c -c public <target> OSPFV3-MIB-JUNIPER::jnxOspfv3MulticastExtensions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.4.1.1.1.12.1 snmpget -v2c -c public <target> OSPFV3-MIB-JUNIPER::jnxOspfv3MulticastExtensions.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2636.5.4.1.1.1.12.1 s <value>
Start monitoring Juniper Networks router/switch running OSPFv3 with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OSPFV3-MIB-JUNIPER::jnxOspfv3MulticastExtensions OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch running OSPFv3 from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| 1.3.6.1.4.1.2636.5.4 | jnxOspfv3Experiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.4.1 | jnxOspfv3MIB | OSPFV3-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.4.1.1 | jnxOspfv3Objects | OSPFV3-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.4.1.1.1 | jnxOspfv3GeneralGroup | OSPFV3-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.4.1.1.1.12 | jnxOspfv3MulticastExtensions | OSPFV3-MIB-JUNIPER |