All MIBs › OPTIX-SONET-PATH-MIB-V2 › stsPathINCTRCC2
stsPathINCTRCC2
Module: OPTIX-SONET-PATH-MIB-V2
OID (symbolic): OPTIX-SONET-PATH-MIB-V2::stsPathINCTRCC2
OID (numeric): 1.3.6.1.4.1.2011.2.25.4.20.5.1.1.17
Node type: OBJECT-TYPE
Type: C2Value
Access: read-only
Description: The C2 byte hex code received. Valid values are shown below. Value Description UNEQ 0x00 The C2 content to be transmitted is unloaded. EQPD (default) 0x01 The C2 content to be transmitted is loaded with normal SPE. VT-STS1 0x02 The C2 content to be transmitted: STS-1 SPE of VT structure. Default value for C2 in DS1 unit LOCK-VT 0x03 The C2 content to be transmitted: lock VT mode. DS3 0x04 The C2 content to be transmitted: DS3 asynchronous mapping. Default value for C2 in DS3 port. DS4NA 0x12 The C2 content to be transmitted: DS4NA asynchronous mapping. ATM 0x13 The C2 content to be transmitted: ATM mapping. DQDB 0x14 The C2 content to be transmitted: DQDB mapping. FDDI 0x15 The C2 content to be transmitted: FDDI asynchronous mapping. HDLC-OVER-SONET 0x16 The C2 content to be transmitted: HDLC-OVER-SONET mapping. LAPS 0x18 GFP 0x1b O.181 0xfe The C2 content to be transmitted: O.181 testing signal. Other byte Hex code Non standard C2.
What is stsPathINCTRCC2?
The C2 byte signal-label hex code actually received on this path, indicating what payload mapping the far end believes it is sending; compare against stsPathEXPTRCC2 to check for a mismatch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.2.25.4.20.5.1.1.17 snmpwalk -v2c -c public <target> OPTIX-SONET-PATH-MIB-V2::stsPathINCTRCC2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.2.25.4.20.5.1.1.17.1 snmpget -v2c -c public <target> OPTIX-SONET-PATH-MIB-V2::stsPathINCTRCC2.1
Start monitoring Huawei OptiX SONET/SDH optical transport equipment (path-layer configuration/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OPTIX-SONET-PATH-MIB-V2::stsPathINCTRCC2 OID value, configure state conditions and alerts, and monitor any Huawei OptiX SONET/SDH optical transport equipment (path-layer configuration/status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.2 | products | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.2.25 | transmission | HUAWEI-MIB |
| 1.3.6.1.4.1.2011.2.25.4 | optixProvision | OPTIX-OID-MIB |
| 1.3.6.1.4.1.2011.2.25.4.20 | optixProvisionSonet | OPTIX-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.2.25.4.20.5 | optixsonetPathAttrib | OPTIX-SONET-PATH-MIB-V2 |
| 1.3.6.1.4.1.2011.2.25.4.20.5.1 | optixsonetStsPathTable | OPTIX-SONET-PATH-MIB-V2 |
| 1.3.6.1.4.1.2011.2.25.4.20.5.1.1 | optixsonetStsPathEntry | OPTIX-SONET-PATH-MIB-V2 |
| 1.3.6.1.4.1.2011.2.25.4.20.5.1.1.17 | stsPathINCTRCC2 | OPTIX-SONET-PATH-MIB-V2 |