All MIBs › OPTIX-SONET-PATH-MIB-V2 › stsPathDelayTime
stsPathDelayTime
Module: OPTIX-SONET-PATH-MIB-V2
OID (symbolic): OPTIX-SONET-PATH-MIB-V2::stsPathDelayTime
OID (numeric): 1.3.6.1.4.1.2011.2.25.4.20.5.1.1.8
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-write
Description: Delay time is hold-off time. It is an integer. Valid value ranges from 0 to 255. Unit is 100 ms. Default value is 0.Delay times are useful for interworking of protection schemes. For example, an optical port is configured for both UPSR and BLSR simultaneously. After the delay time is set, when a defect condition is declared on the port, the UPSR switching is not initiated. When the timer expires, the UPSR switching is initiated if the defect condition is still present at this point. When only one kind of protection UPSR is configured, just use the default value.
What is stsPathDelayTime?
The hold-off time, in units of 100 ms (0 to 255, default 0), the path waits before initiating a UPSR protection switch after a defect is declared -- useful for coordinating with another protection scheme, like BLSR, running on the same port so the faster mechanism gets first chance to react.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.2.25.4.20.5.1.1.8 snmpwalk -v2c -c public <target> OPTIX-SONET-PATH-MIB-V2::stsPathDelayTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.2.25.4.20.5.1.1.8.1 snmpget -v2c -c public <target> OPTIX-SONET-PATH-MIB-V2::stsPathDelayTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.2.25.4.20.5.1.1.8.1 i <value>
Start monitoring Huawei OptiX SONET/SDH optical transport equipment (path-layer configuration/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OPTIX-SONET-PATH-MIB-V2::stsPathDelayTime OID value, configure state conditions and alerts, and monitor any Huawei OptiX SONET/SDH optical transport equipment (path-layer configuration/status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.2 | products | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.2.25 | transmission | HUAWEI-MIB |
| 1.3.6.1.4.1.2011.2.25.4 | optixProvision | OPTIX-OID-MIB |
| 1.3.6.1.4.1.2011.2.25.4.20 | optixProvisionSonet | OPTIX-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.2.25.4.20.5 | optixsonetPathAttrib | OPTIX-SONET-PATH-MIB-V2 |
| 1.3.6.1.4.1.2011.2.25.4.20.5.1 | optixsonetStsPathTable | OPTIX-SONET-PATH-MIB-V2 |
| 1.3.6.1.4.1.2011.2.25.4.20.5.1.1 | optixsonetStsPathEntry | OPTIX-SONET-PATH-MIB-V2 |
| 1.3.6.1.4.1.2011.2.25.4.20.5.1.1.8 | stsPathDelayTime | OPTIX-SONET-PATH-MIB-V2 |