All MIBs › ONS15501-MIB › ons15501OutputOpticalPower
ons15501OutputOpticalPower
Module: ONS15501-MIB
OID (symbolic): ONS15501-MIB::ons15501OutputOpticalPower
OID (numeric): 1.3.6.1.4.1.1869.11.11.2.4
Node type: OBJECT-TYPE
Type: Ons15501TenthdB
Access: read-only
Description: The measured value for raw optical power being generated at the output of the Amplifier.
What is ons15501OutputOpticalPower?
This OID reports the raw measured optical power, in tenths of a dBm, at the amplifier's output. An admin monitors this as the direct physical output reading, distinct from the calculated output signal power used for alarming.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1869.11.11.2.4 snmpwalk -v2c -c public <target> ONS15501-MIB::ons15501OutputOpticalPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1869.11.11.2.4.1 snmpget -v2c -c public <target> ONS15501-MIB::ons15501OutputOpticalPower.1
Start monitoring Cisco ONS 15501 EDFA optical amplifier (optical power/alarm and software image status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ONS15501-MIB::ons15501OutputOpticalPower OID value, configure state conditions and alerts, and monitor any Cisco ONS 15501 EDFA optical amplifier (optical power/alarm and software image status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1869 | synchronous | ONS15501-MIB |
| 1.3.6.1.4.1.1869.11 | synEmbLx | ONS15501-MIB |
| 1.3.6.1.4.1.1869.11.11 | ons15501MIB | ONS15501-MIB |
| 1.3.6.1.4.1.1869.11.11.2 | ons15501Attr | ONS15501-MIB |
| 1.3.6.1.4.1.1869.11.11.2.4 | ons15501OutputOpticalPower | ONS15501-MIB |