All MIBs › OMNITRON-MIB › portIngressRate
portIngressRate
Module: OMNITRON-MIB
OID (symbolic): OMNITRON-MIB::portIngressRate
OID (numeric): 1.3.6.1.4.1.7342.2.1.4.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Used to get or set the port throughput limit selection. The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7) where: 0 = 100 Mbps 1 = 128 kbps 2 = 256 kbps 3 = 512 kbps 4 = 1 Mbps 5 = 2 Mbps 6 = 4 Mbps 7 = 8 Mbps Used on types 100, 101 (lower limit=64, upper limit=100,000) Values are number of kbps per second, i.e. rate = value x 1000, units in bps Used on types 97, 99, 102, 105, 106, 108, 109, 112, 113 (lower limit=64, upper limit=1,000,000) Values are number of kbps per second, i.e. rate = value x 1000, units in bps Types not listed have no limit.
What is portIngressRate?
Selects the port's ingress throughput limit; on types 80/96/70/90/86/84/87 it uses the same 0-7 enumerated rate table as portEgressRate, while types 100/101 and the 97/99/102/105/106/108/109/112/113 family instead take a direct kbps value (lower limit 64) multiplied by 1000 to get bps. An admin caps inbound traffic to match an SLA, being careful to use the right units (enum vs. raw kbps) for that specific module type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7342.2.1.4.1.10 snmpwalk -v2c -c public <target> OMNITRON-MIB::portIngressRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7342.2.1.4.1.10.1 snmpget -v2c -c public <target> OMNITRON-MIB::portIngressRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7342.2.1.4.1.10.1 i <value>
Start monitoring Omnitron iConverter media converter chassis (hardware inventory/asset identity) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNITRON-MIB::portIngressRate OID value, configure state conditions and alerts, and monitor any Omnitron iConverter media converter chassis (hardware inventory/asset identity) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7342 | omnitron | OMNITRON-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7342.2 | prodAgent | OMNITRON-MIB |
| 1.3.6.1.4.1.7342.2.1 | enhancedchassisTable | OMNITRON-MIB |
| 1.3.6.1.4.1.7342.2.1.4 | modulePortsTable | OMNITRON-MIB |
| 1.3.6.1.4.1.7342.2.1.4.1 | modulePortsEntry | OMNITRON-MIB |
| 1.3.6.1.4.1.7342.2.1.4.1.10 | portIngressRate | OMNITRON-MIB |