All MIBs › OMNITRON-MIB › portEgressRate
portEgressRate
Module: OMNITRON-MIB
OID (symbolic): OMNITRON-MIB::portEgressRate
OID (numeric): 1.3.6.1.4.1.7342.2.1.4.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Used to get or set the port throughput limit selection. The following are the limits are enforced by module type: Used on types 80, 96, 70, 90, 86, 84, 87 (lower limit=0, upper limit=7) where: 0 = 100 Mbps 1 = 128 kbps 2 = 256 kbps 3 = 512 kbps 4 = 1 Mbps 5 = 2 Mbps 6 = 4 Mbps 7 = 8 Mbps Used on types 100, 101 (lower limit=1, upper limit=20) where: 1 = 64 kbps 2 = 128 kbps 3 = 256 kbps 4 = 512 kbps 5 = 768 kbps 6 = 1 Mbps 7 = 2 Mbps 8 = 3 Mbps 9 = 4 Mbps 10 = 5 Mbps 11 = 6 Mbps 12 = 7 Mbps 13 = 8 Mbps 14 = 9 Mbps 15 = 10 Mbps 16 = 20 Mbps 17 = 30 Mbps 18 = 40 Mbps 19 = 50 Mbps 20 = 100 Mbps Used on types 105, 106 (lower limit=1, upper limit=33) 1 = 64 kbps 2 = 128 kbps 3 = 256 kbps 4 = 512 kbps 5 = 768 kbps 6 = 1 Mbps 7 = 2 Mbps 8 = 3 Mbps 9 = 4 Mbps 10 = 5 Mbps 11 = 6 Mbps 12 = 7 Mbps 13 = 8 Mbps 14 = 9 Mbps 15 = 10 Mbps 16 = 20 Mbps 17 = 30 Mbps 18 = 40 Mbps 19 = 50 Mbps 20 = 60 Mbps 21 = 70 Mbps 22 = 80 Mbps 23 = 90 Mbps 24 = 100 Mbps 25 = 200 Mbps 26 = 300 Mbps 27 = 400 Mbps 28 = 500 Mbps 29 = 600 Mbps 30 = 700 Mbps 31 = 800 Mbps 32 = 900 Mbps 33 = 1000 Mbps Types 97, 99, 102, 108, 109, 112, 113 use numeric values in kpbs with a lower limit of 64 and an upper limit of 1,000,000. Types not listed have no limit.
What is portEgressRate?
Selects the port's throughput-limit setting from a module-type-specific enumerated table (e.g. on types 80/96/70/90/86/84/87, values 0-7 map to fixed rates from 100 Mbps down to 128 kbps; on types 100/101 a wider 1-20 scale reaches up to 100 Mbps in finer steps). An admin picks the enumerated value matching the desired egress cap for that specific module model, always checking the model-specific table since the same number means different rates on different types.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7342.2.1.4.1.3 snmpwalk -v2c -c public <target> OMNITRON-MIB::portEgressRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7342.2.1.4.1.3.1 snmpget -v2c -c public <target> OMNITRON-MIB::portEgressRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7342.2.1.4.1.3.1 i <value>
Start monitoring Omnitron iConverter media converter chassis (hardware inventory/asset identity) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNITRON-MIB::portEgressRate OID value, configure state conditions and alerts, and monitor any Omnitron iConverter media converter chassis (hardware inventory/asset identity) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7342 | omnitron | OMNITRON-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7342.2 | prodAgent | OMNITRON-MIB |
| 1.3.6.1.4.1.7342.2.1 | enhancedchassisTable | OMNITRON-MIB |
| 1.3.6.1.4.1.7342.2.1.4 | modulePortsTable | OMNITRON-MIB |
| 1.3.6.1.4.1.7342.2.1.4.1 | modulePortsEntry | OMNITRON-MIB |
| 1.3.6.1.4.1.7342.2.1.4.1.3 | portEgressRate | OMNITRON-MIB |