All MIBs › OMNI-gx2LM-MIB › gx2Lm1000HoldTimeData
gx2Lm1000HoldTimeData
Module: OMNI-gx2LM-MIB
OID (symbolic): OMNI-gx2LM-MIB::gx2Lm1000HoldTimeData
OID (numeric): 1.3.6.1.4.1.1166.6.1.2.4.6.5.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
What is gx2Lm1000HoldTimeData?
This holds the alarm hold-time value, in seconds from 0 to 1300, used to suppress noisy or flapping alarms on the analog parameters elsewhere in this MIB. An admin raises this value for a parameter that tends to briefly cross an alarm threshold during normal operation, so a transient blip doesn't generate a nuisance alarm before the condition is confirmed as sustained. The source MIB's own DESCRIPTION for this object is incomplete, listing example index-to-alarm mappings as literal placeholder text ('index 1 = xxx, index 2 = xxxx'), so exactly which gx2Lm1000HoldTimeSpecIndex value maps to which specific alarm object isn't actually documented in this MIB.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.4.6.5.3 snmpwalk -v2c -c public <target> OMNI-gx2LM-MIB::gx2Lm1000HoldTimeData
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.4.6.5.3.1 snmpget -v2c -c public <target> OMNI-gx2LM-MIB::gx2Lm1000HoldTimeData.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.6.1.2.4.6.5.3.1 i <value>
Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 LM laser transmitter module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2LM-MIB::gx2Lm1000HoldTimeData OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 LM laser transmitter module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6 | motproxies | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6.1 | hfc | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2 | hfcDevices | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2.4 | gx2Lm | GX2HFC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.4.6 | gx2Lm1000HoldTimeTable | OMNI-gx2LM-MIB |
| 1.3.6.1.4.1.1166.6.1.2.4.6.5 | gx2Lm1000HoldTimeEntry | OMNI-gx2LM-MIB |
| 1.3.6.1.4.1.1166.6.1.2.4.6.5.3 | gx2Lm1000HoldTimeData | OMNI-gx2LM-MIB |