OLD-CISCO-NOVELL-MIB

All MIBs › OLD-CISCO-NOVELL-MIB

Category: Legacy Cisco IOS

Description: Provides legacy Cisco IOS IPX/Novell routing and SAP objects from early Cisco IOS versions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OLD-CISCO-NOVELL-MIB?

OLD-CISCO-NOVELL-MIB is a legacy proprietary Cisco MIB from early Cisco IOS releases that predates the standardized IPX MIB, providing objects for Novell IPX/SAP routing on Cisco routers. No module description or sample objects were captured for this module, indicating it is an older, sparsely-documented artifact largely superseded by later IPX and SAP MIBs in modern IOS. Historically such MIBs exposed IPX interface state, routing table entries, and SAP (Service Advertising Protocol) service listings rather than hardware health data. Because it is Cisco-proprietary and IPX-specific, it has no dependency on modern IETF standards and is tied to the now largely retired Novell NetWare/IPX protocol stack. It would only be encountered when managing very old Cisco routers still running legacy IPX routing in a Novell NetWare environment. Engineers can download the OLD-CISCO-NOVELL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OLD-CISCO-NOVELL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IOS router (legacy)
Novell IPX network device

Monitoring Examples

Specific object and table names were not available in the source extract, so a concrete polling scenario cannot be described with confidence; historically, MIBs of this class exposed IPX routing table and SAP advertisement entries an administrator would poll to confirm IPX routes and Novell services were being advertised correctly.

What Can Be Monitored

IPX routing table entries
SAP service advertisements
IPX interface status

Imported Objects

From CISCO-SMI

temporary

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
tmpnovell	1.3.6.1.4.1.9.3.4
INT novellInput	1.3.6.1.4.1.9.3.4.1	INTEGER	read-only	Total input count of number of NOVELL packets.
INT novellBcastin	1.3.6.1.4.1.9.3.4.2	INTEGER	read-only	Total count of number of NOVELL input broadcast packets.
INT novellForward	1.3.6.1.4.1.9.3.4.3	INTEGER	read-only	Total count of number of NOVELL packets forwarded.
INT novellBcastout	1.3.6.1.4.1.9.3.4.4	INTEGER	read-only	Total count of number of NOVELL output broadcast packets.
INT novellFormerr	1.3.6.1.4.1.9.3.4.5	INTEGER	read-only	Total count of number of NOVELL input packets with header errors.
INT novellChksum	1.3.6.1.4.1.9.3.4.6	INTEGER	read-only	Total count of number of NOVELL input packets with checksum errors.
INT novellHopcnt	1.3.6.1.4.1.9.3.4.7	INTEGER	read-only	Total count of number of NOVELL input packets that have exceeded the maximum hop count.
INT novellNoroute	1.3.6.1.4.1.9.3.4.8	INTEGER	read-only	Total count of number of NOVELL packets dropped due to no route.
INT novellNoencap	1.3.6.1.4.1.9.3.4.9	INTEGER	read-only	Total count of number of NOVELL packets dropped due to output encapsulation failure.
INT novellOutput	1.3.6.1.4.1.9.3.4.10	INTEGER	read-only	Total count of number of NOVELL output packets.
INT novellInmult	1.3.6.1.4.1.9.3.4.11	INTEGER	read-only	Total count of number of NOVELL input multicast packets.
INT novellLocal	1.3.6.1.4.1.9.3.4.12	INTEGER	read-only	Total count of NOVELL input packets for this host.
INT novellUnknown	1.3.6.1.4.1.9.3.4.13	INTEGER	read-only	Total count of number of unknown NOVELL input packets.
INT novellSapreqin	1.3.6.1.4.1.9.3.4.14	INTEGER	read-only	Total count of number of NOVELL SAP request packets received.
INT novellSapresin	1.3.6.1.4.1.9.3.4.15	INTEGER	read-only	Total count of number of NOVELL SAP response packets received.
INT novellSapout	1.3.6.1.4.1.9.3.4.16	INTEGER	read-only	Total count of number of NOVELL SAP request packets sent.
INT novellSapreply	1.3.6.1.4.1.9.3.4.17	INTEGER	read-only	Total count of number of NOVELL SAP reply packets sent.
INT ipxActThresh	1.3.6.1.4.1.9.3.4.18	INTEGER	read-only	Threshold of IPX accounting records in use before IPX traffic will be unaccounted.
INT ipxActLostPkts	1.3.6.1.4.1.9.3.4.19	INTEGER	read-only	Lost IPX packets due to memory limitations.
INT ipxActLostByts	1.3.6.1.4.1.9.3.4.20	INTEGER	read-only	Total bytes of lost IPX packets.
lipxAccountingTable	1.3.6.1.4.1.9.3.4.21		not-accessible	A list of IPX accounting entries.
lipxAccountingEntry	1.3.6.1.4.1.9.3.4.21.1		not-accessible	something
ADR ipxActSrc	1.3.6.1.4.1.9.3.4.21.1.1	IPXaddress	read-only	IPX Source address for host traffic matrix.
ADR ipxActDst	1.3.6.1.4.1.9.3.4.21.1.2	IPXaddress	read-only	IPX Destination address for host traffic matrix.
INT ipxActPkts	1.3.6.1.4.1.9.3.4.21.1.3	INTEGER	read-only	Number of IPX packets sent from source to destination.
INT ipxActByts	1.3.6.1.4.1.9.3.4.21.1.4	INTEGER	read-only	Total number of bytes in IPX packets from source to destination.
TIK ipxActAge	1.3.6.1.4.1.9.3.4.22	TimeTicks	read-only	The age of the data in the current IPX data matrix.
lipxCkAccountingTable	1.3.6.1.4.1.9.3.4.23		not-accessible	A list of IPX checkpoint accounting entries.
lipxCkAccountingEntry	1.3.6.1.4.1.9.3.4.23.1		not-accessible	something
ADR ipxCkactSrc	1.3.6.1.4.1.9.3.4.23.1.1	IPXaddress	read-only	IPX Source address for host in checkpoint traffic matrix.
ADR ipxCkactDst	1.3.6.1.4.1.9.3.4.23.1.2	IPXaddress	read-only	IPX Destination address for host in checkpoint traffic matrix.
INT ipxCkactPkts	1.3.6.1.4.1.9.3.4.23.1.3	INTEGER	read-only	Number of IPX packets sent from source to destination in checkpoint matrix.
CTR ipxCkactByts	1.3.6.1.4.1.9.3.4.23.1.4	Counter	read-only	Total number of bytes in IPX packets from source to destination in checkpoint matrix.
TIK ipxCkactAge	1.3.6.1.4.1.9.3.4.24	TimeTicks	read-only	Age of data in the IPX checkpoint matrix.
INT ipxActCheckPoint	1.3.6.1.4.1.9.3.4.25	INTEGER	read-write	Check points the IPX accounting database. This mib variable must be read and then set with the same value for the check point to succeed. The value read and then set will be incremented after a successful set request

RFC description

Cisco Novell IPX protocol traffic statistics for router-based products including packet counts, broadcasts, and errors.

Start monitoring Legacy Cisco IOS router (Novell IPX/SAP routing, pre-standard IPX MIB) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OLD-CISCO-NOVELL-MIB

What Is OLD-CISCO-NOVELL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description