OLD-CISCO-APPLETALK-MIB

All MIBs › OLD-CISCO-APPLETALK-MIB

Category: Legacy Cisco IOS

Description: Provides legacy Cisco IOS AppleTalk routing table and zone management objects from early Cisco IOS versions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OLD-CISCO-APPLETALK-MIB?

OLD-CISCO-APPLETALK-MIB is a legacy Cisco Systems proprietary MIB (predating the standard APPLETALK-MIB) reporting AppleTalk protocol packet-flow counters on Cisco routers. Its objects cover total input/output/local/forwarded/broadcast-in/broadcast-out counts, checksum errors, not-gateway/hop-count/no-access/no-route/no-encapsulation drops, inbound multicast, RTMP inbound/outbound, NBP inbound/outbound, ATP, ZIP inbound/outbound, echo, illegal-echo, and short/long DDP packet counts. As a performance MIB it lets an administrator watch AppleTalk protocol traffic volume and error/drop counters on a legacy Cisco router configured for AppleTalk routing. It is deployed on legacy Cisco Systems routers running AppleTalk. Engineers can download the OLD-CISCO-APPLETALK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OLD-CISCO-APPLETALK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Cisco Systems routers (AppleTalk routing)

Monitoring Examples

An administrator checks atNoroute and atNoaccess to diagnose AppleTalk routing drops on a legacy Cisco router.

What Can Be Monitored

AppleTalk protocol traffic and error/drop counters

Imported Objects

From CISCO-SMI

temporary

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
tmpappletalk	1.3.6.1.4.1.9.3.3
INT atInput	1.3.6.1.4.1.9.3.3.1	INTEGER	read-only	Total input count of number of AppleTalk packets.
INT atLocal	1.3.6.1.4.1.9.3.3.2	INTEGER	read-only	Total count of AppleTalk input packets for this host.
INT atBcastin	1.3.6.1.4.1.9.3.3.3	INTEGER	read-only	Total count of number of AppleTalk input broadcast packets.
INT atForward	1.3.6.1.4.1.9.3.3.4	INTEGER	read-only	Total count of number of AppleTalk packets forwarded.
INT atBcastout	1.3.6.1.4.1.9.3.3.5	INTEGER	read-only	Total count of number of AppleTalk output broadcast packets.
INT atChksum	1.3.6.1.4.1.9.3.3.7	INTEGER	read-only	Total count of number of AppleTalk input packets with checksum errors.
INT atNotgate	1.3.6.1.4.1.9.3.3.8	INTEGER	read-only	Total count of AppleTalk input packets received while not routing.
INT atHopcnt	1.3.6.1.4.1.9.3.3.9	INTEGER	read-only	Total count of number of AppleTalk input packets that have exceeded the maximum hop count.
INT atNoaccess	1.3.6.1.4.1.9.3.3.10	INTEGER	read-only	Total number of AppleTalk packets dropped due to access control.
INT atNoroute	1.3.6.1.4.1.9.3.3.11	INTEGER	read-only	Total count of number of AppleTalk packets dropped due to no route.
INT atNoencap	1.3.6.1.4.1.9.3.3.12	INTEGER	read-only	Total count of number of AppleTalk packets dropped due to output encapsulation failure.
INT atOutput	1.3.6.1.4.1.9.3.3.13	INTEGER	read-only	Total count of number of AppleTalk output packets.
INT atInmult	1.3.6.1.4.1.9.3.3.14	INTEGER	read-only	Total count of number of AppleTalk input multicast packets.
INT atRtmpin	1.3.6.1.4.1.9.3.3.15	INTEGER	read-only	Total count of number of AppleTalk RTMP packets received.
INT atRtmpout	1.3.6.1.4.1.9.3.3.16	INTEGER	read-only	Total count of number of AppleTalk RTMP packets sent.
INT atNbpin	1.3.6.1.4.1.9.3.3.17	INTEGER	read-only	Total count of number of AppleTalk NBP packets received.
INT atNbpout	1.3.6.1.4.1.9.3.3.18	INTEGER	read-only	Total count of number of AppleTalk NBP packets sent.
INT atAtp	1.3.6.1.4.1.9.3.3.19	INTEGER	read-only	Total count of number of AppleTalk ATP packets received.
INT atZipin	1.3.6.1.4.1.9.3.3.20	INTEGER	read-only	Total count of number of AppleTalk ZIP packets received.
INT atZipout	1.3.6.1.4.1.9.3.3.21	INTEGER	read-only	Total count of number of AppleTalk ZIP packets sent.
INT atEcho	1.3.6.1.4.1.9.3.3.22	INTEGER	read-only	Total count of number of AppleTalk Echo packets received.
INT atEchoill	1.3.6.1.4.1.9.3.3.23	INTEGER	read-only	Total count of number of illegal AppleTalk Echo packets received.
INT atDdpshort	1.3.6.1.4.1.9.3.3.24	INTEGER	read-only	Total count of number of short AppleTalk DDP packets received.
INT atDdplong	1.3.6.1.4.1.9.3.3.25	INTEGER	read-only	Total count of number of long AppleTalk DDP packets received.
INT atDdpbad	1.3.6.1.4.1.9.3.3.26	INTEGER	read-only	Total count of number of illegal sized AppleTalk DDP packets received.
INT atNobuffer	1.3.6.1.4.1.9.3.3.27	INTEGER	read-only	Total count of number of AppleTalk packets lost due to no memory.
INT atArpreq	1.3.6.1.4.1.9.3.3.28	INTEGER	read-only	Total count of number of input AppleTalk ARP request packets.
INT atArpreply	1.3.6.1.4.1.9.3.3.29	INTEGER	read-only	Total count of number of AppleTalk ARP reply packets output.
INT atArpprobe	1.3.6.1.4.1.9.3.3.30	INTEGER	read-only	Total count of number of input AppleTalk ARP probe packets.
INT atUnknown	1.3.6.1.4.1.9.3.3.31	INTEGER	read-only	Total count of number of unknown AppleTalk input packets.

RFC description

Monitors AppleTalk packet statistics, broadcasts, and errors on Cisco routers (legacy MIB).

Start monitoring Legacy Cisco Systems router (AppleTalk routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OLD-CISCO-APPLETALK-MIB

What Is OLD-CISCO-APPLETALK-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description