All MIBs › ODSLANBlazer7000-MIB › lanBlazer7000VlanStatus
lanBlazer7000VlanStatus
Module: ODSLANBlazer7000-MIB
OID (symbolic): ODSLANBlazer7000-MIB::lanBlazer7000VlanStatus
OID (numeric): 1.3.6.1.4.1.50.8.1.2.1.7.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of an entry to be created or deleted. When adding an entry all fields will be set, and then the status is set to createRequest(1) (indicating that the entry is to be created). When deleting an entry the status is set to destroyRequest(3) (indicating that the entry is to be destroyed). During creation the status will be underCreation(2). If the creation is successful, then the status will be set to active(5). Otherwise if the creation was not successful then one of the following error codes will be set and the entry will not be created: otherError(6) - An error other than the others defined. entryExistsError(7) - An entry already exists. invalidVlanID(8) - the VLAN ID is invalid. invalidVlanName(9) - the VLAN name is invalid. invalidVlanAFTIndex(10) - the VLAN AFT index is invalid. invalidVlanBridgeIndex(11) - the VLAN bridge index is invalid. invalidVlanInitialHashTableSize(12) - the VLAN initial hash table size is invalid. invalidVlanAutoIncrementHTSize(13) - the VLAN auto increment hash table size is invalid.
What is lanBlazer7000VlanStatus?
Drives this VLAN's create/destroy lifecycle via SNMP SET: an admin sets the VLAN's ID, name, AFT index, and bridge index, then writes createRequest(1), watches it pass through underCreation(2) to active(5), or writes destroyRequest(3) to remove it via underDestruction(4); a failed create instead returns one of several specific error codes such as entryExistsError(7), invalidVlanID(8), invalidVlanName(9), invalidVlanAFTIndex(10), invalidVlanBridgeIndex(11), or invalid hash-table-size errors (12/13). This is the standard SNMP row-creation handshake an admin uses to provision or tear down a VLAN entirely through SNMP rather than a CLI.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.7.1.1.1.6 snmpwalk -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer7000VlanStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.7.1.1.1.6.1 snmpget -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer7000VlanStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.50.8.1.2.1.7.1.1.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> lanBlazer7000VlanStatus.1
Start monitoring ODS LANBlazer 7000 WAN test/analysis instrument with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ODSLANBlazer7000-MIB::lanBlazer7000VlanStatus OID value, configure state conditions and alerts, and monitor any ODS LANBlazer 7000 WAN test/analysis instrument from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.50 | ods | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8 | odsTPS | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1 | odsLANBlazer | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2 | odsLANBlazerMibs | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1 | odsLANBlazer7000Mib | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.7 | lanBlazer7000VlanMgt | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.7.1 | lanBlazer7000Vlans | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.7.1.1 | lanBlazer7000VlanTable | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.7.1.1.1 | lanBlazer7000VlanEntry | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.7.1.1.1.6 | lanBlazer7000VlanStatus | ODSLANBlazer7000-MIB |