ODSLANBlazer7000-MIB :: lanBlazer7000SwitchPortKnownMode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ODSLANBlazer7000-MIB › lanBlazer7000SwitchPortKnownMode

lanBlazer7000SwitchPortKnownMode

Module: ODSLANBlazer7000-MIB

OID (symbolic): ODSLANBlazer7000-MIB::lanBlazer7000SwitchPortKnownMode

OID (numeric): 1.3.6.1.4.1.50.8.1.2.1.5.2.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enabling known mode for this switch port causes the port to safely discard frames flooded because they are unknown unicast frames. This mode greatly enhances the efficiency of the port's output buffer since space is not wasted for frames not meant for this port.

Enabling this feature disables learning for this port. Addresses associated for this port should be entered statically. The default is disable.

What is lanBlazer7000SwitchPortKnownMode?

When enabled, causes this port to safely discard flooded frames addressed to unknown unicast destinations rather than buffering them, improving output-buffer efficiency; enabling it also disables dynamic learning on the port, so addresses meant to reach it must be entered statically (default is disabled). An admin enables this on a port where all legitimate destination MACs are known and statically configured, to stop the port's buffer being wasted on floods for addresses that will never actually be behind it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.5.2.1.1.7
snmpwalk -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer7000SwitchPortKnownMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.5.2.1.1.7.1
snmpget -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer7000SwitchPortKnownMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.50.8.1.2.1.5.2.1.1.7.1 i <value>

Start monitoring ODS LANBlazer 7000 WAN test/analysis instrument with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ODSLANBlazer7000-MIB::lanBlazer7000SwitchPortKnownMode OID value, configure state conditions and alerts, and monitor any ODS LANBlazer 7000 WAN test/analysis instrument from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.50odsODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8odsTPSODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1odsLANBlazerODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2odsLANBlazerMibsODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1odsLANBlazer7000MibODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.5lanBlazer7000SwitchingODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.5.2lanBlazer7000SwitchPortMgtODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.5.2.1lanBlazer7000SwitchPortTableODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.5.2.1.1lanBlazer7000SwitchPortEntryODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.5.2.1.1.7lanBlazer7000SwitchPortKnownModeODSLANBlazer7000-MIB