ODSLANBlazer7000-MIB :: lanBlazer7000PortRateLimitMode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ODSLANBlazer7000-MIB › lanBlazer7000PortRateLimitMode

lanBlazer7000PortRateLimitMode

Module: ODSLANBlazer7000-MIB

OID (symbolic): ODSLANBlazer7000-MIB::lanBlazer7000PortRateLimitMode

OID (numeric): 1.3.6.1.4.1.50.8.1.2.1.3.6.6.1.1.61

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object configures whether rate limiting is enabled for this port (the factory default is enable(1)). Enabling rate limiting for this port prevents floods from overwhelming the output buffer associated with this port.

Normally, rate limiting will only consider frames that are flooded to this port. This typically does not include known multicasts. However, known multicasts can be included in the flood limiting by setting the value of this object to enableIncludeKnownMulticast(3).

What is lanBlazer7000PortRateLimitMode?

Enables (the factory default) or disables flood-frame rate limiting on this port, with enableIncludeKnownMulticast(3) additionally counting known multicast traffic against the limit (normally only unknown-destination floods are counted). An admin uses this to stop broadcast/flood storms from one misbehaving host from overrunning this port's output buffer and starving other traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.3.6.6.1.1.61
snmpwalk -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer7000PortRateLimitMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.3.6.6.1.1.61.1
snmpget -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer7000PortRateLimitMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.50.8.1.2.1.3.6.6.1.1.61.1 i <value>

Start monitoring ODS LANBlazer 7000 WAN test/analysis instrument with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ODSLANBlazer7000-MIB::lanBlazer7000PortRateLimitMode OID value, configure state conditions and alerts, and monitor any ODS LANBlazer 7000 WAN test/analysis instrument from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.50odsODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8odsTPSODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1odsLANBlazerODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2odsLANBlazerMibsODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1odsLANBlazer7000MibODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.3lanBlazer7000ChassisODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.3.6lanBlazer7000PortsODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.3.6.6lanBlazer7000PortRateLimitMgtODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.3.6.6.1lanBlazer7000PortRateLimitTableODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.3.6.6.1.1lanBlazer7000PortRateLimitEntryODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.3.6.6.1.1.61lanBlazer7000PortRateLimitModeODSLANBlazer7000-MIB