All MIBs › ODSLANBlazer7000-MIB › lanBlazer7000PortCategoryMode
lanBlazer7000PortCategoryMode
Module: ODSLANBlazer7000-MIB
OID (symbolic): ODSLANBlazer7000-MIB::lanBlazer7000PortCategoryMode
OID (numeric): 1.3.6.1.4.1.50.8.1.2.1.3.6.8.1.1.81
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: By default, all ports are considered service ports. A service port is a port that provides a networks service such as a connection to a server, other switches, or the like. A service port will trigger the service port event for status changes with the alarm severity and will trigger an alarm in the alarm table on link failure.
In contrast, user ports trigger the user link event with warning severity. They do not trigger an alarm upon link failures. User ports are useful to prevent floods of traps or entries in the alarm table. This is especially true for ports connected to user hosts that power up in the morning and power down again at the end of the work day.
What is lanBlazer7000PortCategoryMode?
Classifies a port as servicePort(2) (the default), which raises alarm-severity events and alarm-table entries on link failure, or userPort(1), which only raises lower-severity warning events and does not populate the alarm table. An admin sets end-user desktop ports to userPort(1) so routine daily power-on/power-off cycles don't flood the alarm table, while leaving uplinks and server ports as servicePort(2) so real failures are escalated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.3.6.8.1.1.81 snmpwalk -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer7000PortCategoryMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.3.6.8.1.1.81.1 snmpget -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer7000PortCategoryMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.50.8.1.2.1.3.6.8.1.1.81.1 i <value>
Start monitoring ODS LANBlazer 7000 WAN test/analysis instrument with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ODSLANBlazer7000-MIB::lanBlazer7000PortCategoryMode OID value, configure state conditions and alerts, and monitor any ODS LANBlazer 7000 WAN test/analysis instrument from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.50 | ods | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8 | odsTPS | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1 | odsLANBlazer | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2 | odsLANBlazerMibs | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1 | odsLANBlazer7000Mib | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.3 | lanBlazer7000Chassis | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.3.6 | lanBlazer7000Ports | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.3.6.8 | lanBlazer7000PortCategoryMgt | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.3.6.8.1 | lanBlazer7000PortCategoryTable | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.3.6.8.1.1 | lanBlazer7000PortCategoryEntry | ODSLANBlazer7000-MIB |
| 1.3.6.1.4.1.50.8.1.2.1.3.6.8.1.1.81 | lanBlazer7000PortCategoryMode | ODSLANBlazer7000-MIB |